CarPro DLUX Plastic and Wheel Coating Reviews

Put on two coats and after the first wash I am pretty happy with it for the price. Long term relatability is yet to be seen but I'm happy with it as a cheap solution.

Goes on very smooth, darkens the trim slightly, seems to protect well. Really like it on the wheels.

Used this on some fairly intricate wheels, which had me a bit nervous. The product spread nicely and after buffing off, I had no problems, wheels look fantastic and shed water like crazy. Super easy to clean now!

This product is a fantastic value. I use it after I restore headlights, to restore plastics, protect new plastics, wheels, calipers, powder coated metals. Lasts several years, goes on thick and a great film build, but also easy to use.

This product is simply amazing. So easy to use and very versatile. Lasts longer than advertised as long as you take care of it.

Great product, easy to apply. Applied on my wheels and calipers as brake dust is brutal on my AMG, and this coating makes it a breeze to clean my wheels now.

Very easy to apply! ive used it on my wheels and some carbon exterior accents as well. insane water beading! highly recommended

I bought DLUX to coat my new tail and headlights and to seal the bumpers that I coated with Solution Finish. So far, so good. I like the ease of application. At this point, I have no cons.

I bought Carpro Dlux to use on my personal vehicles. I applied Dlux in August of 2018 and so far the product is will working on the face of the wheel, but not so well in the barrel of the wheel. I plan to use this product again on my daily driver.

A great trim product. Does a good job at protecting trim. It also works well as a wheel coating and to protect the headlights and taillights.

I've added this to my ceramic routine to make sure my car is protected all around. Works great for my wheels as well as cars with lots of plastic pieces like the BRZ.

I tried this product and I didn't expect much, applying it to exterior rubber and plastic trim areas and to my alloy wheels. It worked great on my wheels; where I once had to work hard to remove brake dust and dirt every couple of days, the coating made it possible for me to just have to wipe it down with a microfiber cloth to remove everything. Excellent results! The rubber and plastic trim was another matter. This product will make rubber and plastic trim shine almost like new, however the finish will not last as long as it does on metal or alloys. You will have to reapply more often on these areas; at least that has been my experience. Still; this product is as good as any I have tried, and the results make it worth buying. The price is also what makes the pros outweigh the cons.

I applied this to my Nissan Xterra to preserve the tons of plastic trim, and absolutely love the look and protection that it provides. When taking the roof rack off for spring cleaning, one of the nuts was spinning, so I had to use pliers to try and grab the nut at an awkward angle and ended up rubbing against the coated plastic. Instead of any damage occurring to the plastic, I saw thin amounts of clear residue be removed, which I can only guess was some of the coating (since I didn't wipe the excess because the plastic is textured). Thankfully, there was no damage and I simply applied a little more DLUX which removed any traces of the pliers having been rubbed against the plastic. Definitely, my go to for plastic coatings from now on!

Maybe I'm imaging this part, but it also seems like my highway MPGs increased on my Xterra too?

Excellent product-applied to all the exterior plastics of my wife's neglected 08 landrover LR2. This product rejuvenated all the plastics and is still looking great a month later.

I decided to use DLUX to coat my satin black Rotiform wheels when I purchased them prior to putting them on my Audi. I put on two coats and has been 6 months now and is still going strong. All I need to to wash my wheels is some good soap (such as Carpro Reset) in my wheel bucket and that's it. No more wheel cleaners. Most of the brake dust rinses off with the initial rinse. I also applied this to my exhaust tips and all trim and am very pleased with durability and how it looks.

Was easy to apply. Must apply heavily. Finish looks great. I used to use ceramic pro products so this was a walk in the park.

I've used DLUX many times, including my own anodized-finish Volk TE-37 wheels. I put on two coats, and it lasted me a little over a year. It made brake dust have a much harder time sticking to the wheel, and I only needed to use iron-x maybe once a month. All other times was just soapy water. Brake pad choice certainly does have a factor here, but I wouldn't go without it anymore.

I would give this a 4/5 stars. The packaging and the applicators are very good. The product is a little difficult to apply though. Instructions say to apply then wipe off but I ended up wiping off all the product after the elotted 10 mins. So I figured out that you need to apply heavy, real heavy and go in one swipe in one direction to avoid really ugly streaks. Let it dry and dont touch it because it is like concrete, whatever is on the surface will dry there forever. Other than that, very high shine and durability. I would use this for your chrome exhaust (since it can withstand 800 degrees F), engine bay plastics, any other plastic/rubber molds in/out the car. I would not recommend this for wheels or tires. I would do Glosscoat for wheels instead.