Meguiar's Unigrit 1500 Foam Finishing Disc
|1 - 14||$7.99||0%|
|15 - 1000||$6.99||13%|
- Safely and easily remove deeper scratches and imperfections from your paint
- Spray the surface with water for lubrication
- Clean the pad frequently with water while sanding
- Start with the less aggressive pads and move up as needed
- Product Code: S6F1500
- Read full description
Customer Reviews0% of customers said that they would buy this item again
Based upon 1 ratings
Customers Who Bought This Item Also Bought
Product DescriptionThe Meguiar's Unigrit Finishing Disc's make removing fine imperfections from your paint fast and easy! It can help you remove scratches, water marks, bird droppings, orange peel from the paint or restore oxidized and faded headlights. These ultra fine sanding pads are very user friendly as they help quickly remove blemishes with little effort and bare minimal haze, if any at all. Simply attach your Meguiar's Foam Sanding Interface (3") to your buffer and the hook and loop backing on your Unigrit Finishing Disc will secure the pad to the interface. Spray the Finishing Disc and the area you want to sand with some water. On a lower speed setting using minimal pressure buff away the imperfections just like you would with a polish. We recommend checking your work and cleaning the pad frequently. To clean the pad spray the pad with some water and run your finger or a clean microfiber along this pad to remove any residue, it's that simple! We always recommend starting with the least aggressive sanding pad and working your way up to the more aggressive pads as needed. If you are looking for an easy way to remove noticeable imperfections from your paint, look no further then the Meguiar's Unigrit Finishing Disc's!
The Meguiar's Unigrit Finishing Disc's come in a few different sizes and grades so you can have the perfect pad for each and every job!
3" Foam Finishing Disc's - 1000 Grade, 3000 Grade
6" Foam Finishing Disc's - 1500 Grade, 3000 Grade
Reviewed by David o. on 4/21/2014
Would they buy this item again? No
I purchased this specific item, as well as the 1500 and 1000 grit in both 6"and 3". I had used foam type sanding discs in the past for headlight restoration and paint correction, so i knew what to expect.I was surprisingly dissatisfied with the Meguiar's brand discs. On a 2'x2' area of paint with plenty of lubrication my 1000 grit disc was completely worn out to the point of not working by the 4th pass. I had to go into my bag of headlight restoration supplies and pull out a USED 1000 grit disc by 3M. I had used this disc on at least 15 headlight restorations already, it finished the job i was in the middle of and still looked good for more cutting, do it entree back on the bag, not in the trash. The Meguiar's discs all went in the trash, useless. Will only buy 3M for foam sanding discs from now on.