Menzerna Final Finish Product Reviews

I used it after applying Chemical Guys Extreme EZ-Creme Glaze and Menzerna PO106FA Nano Polish and it was well worth buying and applying. Use it as the last step before applying a sealant and wax.

I find this pretty easy to use with my PC and a white pad. My Infiniti has pretty soft black paint, but my yellow S2000 seems to be harder. Hence, this does better work on the Infiniti.

I used this last week after Menzerna's IP and found it difficult to remove in a few spots(by hand, microfiber towel). I figured out later that I should have used a bit more speed on the polisher and I used a black pad instead of the recommended white pad. I got good results after the black pad was saturated with the product (very thin application) and a speed of 5.5-6. Next time I will try the white at 5-5.5 as a starting point.

I have reaquaitned my self with this polish and love it on SOFT paints, this stuff has VERY little correction ability. Its whole purpose is it refine the surface and give you the maximum reflection period. If you have a harder paint I would suggest 85rd instead.

After applying FPII over IP, the gloss of the paint was noticably improved (even on my silver car). Goes on and off with ease.

FPII is great following up after any heavier polish. Definitely works well in removing any haze left from heavier polishes. Very easy to apply and gives a smooth, slick surface.

FPII is a great final polish if your paint is in very good condition. It will not remove much in the way of scratches and swirl marks. It leaves a smooth surface for sealant or wax.

The FPII is a great finishing polish I applied on top of Menzerna's IP. It leaves the paint extremely clean and smooth. It is easy to apply and worth every penny.