Menzerna Power Gloss Compound PG 1000 Product Reviews

Well when its bad this is the stuff to reach for, the badness of the bad polishes very Aggressive. removes deep scratches from clear coat

Power gloss is a great product to have in my arsenal. I use both pg and megs 105. I believe PG is just a step above megs 105 as far as it cuts faster but doesn't leave as good as a finish as 105. But as far as ceramic clears go, power gloss cuts fast and still leaves a very good finish even when teamed with a wool pad. It's the best I have ever used on any ceramic clear and I do a lot of Mercedes Benz. It does still need to be finished down properly but it's a wonderful product and it works great with megs da microfiber cutting pads on a pc as well with ceramic clears. It does dust but no more than megs 105 does.

I've used Menzerna Polishes with PC and Makita Rotary, but I'll never use PG again.

Power Gloss is an extremely rough compound, even on BMW CC. It is extremely harsh, even with White LLC Pad and leaves alot of Holograms behind that takes more time than needed to repair.

There is much better Compounds than this I would consider. Highly look at M105 if you want something strong that can finish

This compound requires the right kind of paint to be completely effective and is best suited to harder paints found on German and GM vehicles. I used Power Gloss to correct a completely trashed tailgate on a GMC Yukon. While it did leave behind considerable hologramming, the major scratches and defects didn't stand a chance. Finish it down correctly and Power Gloss is a fantastic product to have in your arsenal.

I did notice it tends to be a bit 'stringy' coming out of the tube and loves to drip over the side of the pad so watch where it goes.

I use Menzerna Polishes, exclusively. This is a heavy compound and it is very aggressive. Since it dusts heavily and leaves heavy marring it is not a compound that I recommend. Meguiars Diamond Cut Compund is almost as aggressive, but leaves a much smoother surface. Menzerna Nano polish will easily clean up the Diamond Cut, but Menzerna SIP is necessary to clean up after Power Gloss, then another polish is used to finish. Either Nano or Pristine Finish to complete. My 2 cents..

I use this to deal with problem areas and have been very happy. As others have said, finish with 106ff and 85rd for amazing results.

such a great product. it dusts like hell, but it cuts like no other. make sure to finish with a light polish and then a finishing polish!

Highly impressed. Removed some really bad scratches, using this pad & the 4" purple foamed wool pad. Followed up with a Final finish.

Very strong polish, works great with yellow edge pad and high speed rotary. Leave a nice smooth finish, do follow up with 106ff or final finish II

I love this product. I used this product with the purple wool pad and got rid of some of the worse scratches off a car I have ever seen.

Very good at removing deeper scratches in the clear coat. Customer of mine had a really long scratch on his trunk, used this with a cutting pad, followed up with Menzerna Final Polish II and that scratch was history.

One of the best aggressive polishes. Corrects very well even with mild polishing pads but generally needs a one or two-step polish after to correct the haze and leave a great finish. Does what it says it will and does it well.

Very strong polish that works extremely well. I had some scratches and marks that the Intensive Polish could not remove. This did the trick. I highly recommend using the PO106ff after this polish, as this will leave some hazing.