Optimum FerreX Iron Remover - 17 oz
! We're sorry, this item is currently out of stock
Estimated arrival: unknown. Check out the 128 oz that is in stock right now.
Out of Stock
$20.99
Available Sizes
17 oz
$20.99
($1.23 / oz)
128 oz
$105.99
($0.83 / oz)
Product Information
- Mist FerreX on the exterior and watch it safely dissolve embedded iron deposits
- Remarkably quick and effective cleaner for the exterior paint and wheels
- dissolves and removes other surface contamination as well!
- Product Codes: OPT-21977, OPT-21984
- Read full description
Product Description
The Optimum FerreX Iron Remover will allow you to quickly and easily remove iron deposits from the surface! From your wheels, to painted surfaces, FerreX will bond to and dissolve iron metal and iron oxides from these surfaces. Simply spray on these surface and watch the iron contaminants wash away. Mist it on the paint, wait 5 minutes and wipe it with a damp sponge or skip the sponge and move on to a thorough rinsing. Upon completion you will be stunned at how much has been removed with so little effort. FerreX also dissolves and removes other surface contaminants such as tar and wax with minimal effort. Remove iron deposits and other contamination quickly and easily with the Optimum FerreX Iron Remover today!From The Label
Product Description
FerreX is designed to dissolve ferrous oxides from wheels and painted surfaces quickly, by bonding and dissolving them away with minimal effort, Furthermore, FerreX will dissolve and remove other surface contaminants such as tar and wax at the same.
Directions
DIRECTIONS FOR WHEELS:
- Avoid using on hot surfaces. Wash wheels to remove excess contaminants.
- Spray FerreX directly on wheels and allow 1-2 minutes to fully dissolve ferrous oxides.
- Agitate with a soft bristle brush as needed.
- Rinse off with plenty of water.
- Wash with No Rinse Wash & Shine or Optimum Car Wash before applying FerreX.
- Use on a cool surface and out of direct sunlight. Spray directly on painted surface and allow 1-2 minutes to fully dissolve ferrous oxide. Agitate with a microfiber towel or soft sponge if necessary.
- Rinse off with plenty of water.
Customer Reviews
Dries a little too quick for my liking affecting the desired dwell time. Obviously, a fallout remover drying onto a painted surface is bad. Be careful is all. Prefer Iron-X still.
Expensive, however if used as a clay lube, you can just spray a few sprays into a clay towel. Very efficient and you get two steps done at once!
I bought this to compare with Ironx. It works equally well as Ironx. Ferrex also does the added job of removing tar which is nice. It does still have that infamous iron scent that smells terrible. I still find Ironx to work faster and stay wetter longer.
Customers Who Bought This Item Also Bought
Related Items
Related Categories
