Menzerna PO106ff Ceramic Clear Coat Polish Product Reviews

Menzerna PO106ff Ceramic Clear Coat Polish
Menzerna PO106ff Ceramic Clear Coat Polish
Click to view or buy

Have you used PO106ff Ceramic Clear Coat Polish? If so, we invite you to write a review below and share your experiences with other detailers.


5 Reviews »


  1. I love this. It’s perfect to use after using a medium polish (Intensive Polish) or a heavier compound (Power Gloss). It took of all the hazing the stronger polishes left behind. A must have for any detailer.

    Review by Jin Lim — May 23, 2008 @ 3:35 pm

  2. First time using this polish and I was in love with it. Couldn’t believe its cutting ability and the great polish surface it left. This is the only polish I found to work on any clearcoat.

    Review by Scrooge — June 9, 2008 @ 6:19 pm

  3. I agree with both reviews above… 106ff has decent correcting ability with the right pad and leaves an amazing finish when used with a finishing pad. This is my finishing polish of choice and I doubt I’ll change other than maybe using 85rd on some softer paints. Expensive polish, but more than worth it.

    Review by Ivan — July 15, 2008 @ 7:04 pm

  4. used with Merzerna SIP polish, it removed 99% of my swirls on my Jet Black M3

    Review by Glenn — July 17, 2008 @ 4:56 pm

  5. Works very well following up heavier polishes. But, works well removing medium to light imperfections. Definitely one of my favorite polishes.

    Review by Khoa — July 30, 2008 @ 2:03 pm

  6. This a great polish that NEEDS to be worked down well to produce the best finish and reduce the chance that you will get a defect return on the job. I love to use this with a blue or black LC pad, white is good also. Spend the time to learn how to use this product.

    Review by Greg — October 29, 2008 @ 12:43 am

RSS feed for comments on this post. TrackBack URL


Write Review