Free Shipping over $149 w/coupon DIFree | 3,000+ Products | 95 Brands | 12,000+ Reviews | 1,850+ Detailing Articles
Close Menu
Clean ⋅ Shine ⋅ Protect
Cookies are disabled in your web browser. To shop with Detailed Image, please turn cookies on and then refresh the page.

Gyeon quartz Q² Tire: Best Practices

by

This article is written by Jeff McEachran, GYEON quartz USA National Brand Manager and Owner of Denver Auto Shield.

I wanted to take some time today and discuss the best procedure for applying and getting the most performance out of Gyeon quartz Q² Tire. Q² Tire is an SiO2 based tire gel that is designed to leave a healthy matte finish while helping the tire reject dirt and contaminant. It is very simple to use, but a few tips and tricks in terms of application might help you get a bit more out of each application.

Today we’re applying Q² Tire to a 2013 BMW M3 wearing Michelin Pilot Sports that are definitely not new but not in terrible shape.

First, clean the tire well with your favorite APC or something like Gyeon quartz Q²M Bug & Grime. It is important to remove any existing dressing and leave a clean rubber surface to apply Q² Tire. We performed this step during the initial wash process followed by Q² Iron on the wheels and then blown dry with the MasterBlaster.

tire_fb-1

tire_fb-3

tire_fb-4

Any applicator will work, but I like to use the Gyeon Foam Applicator Blocks from my coating kits. Apply a moderate amount of Q² Tire on to the foam applicator. You can apply directly to the tire or spread the product out a bit first by blotting about half the tire.

tire_fb-5

tire_fb-9

I like to “scrub” Q² Tire multi-directionally in to the surface to make sure I get all of the cracks and crevices in the design of the tire. I’ll go on heavier than necessary to make sure I have adequate coverage, allow it to dry for as long as it takes me to get around all 4 tires, and then come back and wipe up any excess product.

tire_fb-11

Once I have Q² Tire applied to all 4 tires I will go back with the heat gun and dry them out completely for a healthy satin finish.

tire_fb-15

tire_fb-18

That’s it!

  1. Clean the tire well with an APC
  2. Make sure the surface is completely dry before applying
  3. Apply liberally making sure to cover all areas of the tire design
  4. Allow to dry for the time it takes to move around all 4 tires
  5. Wipe off any excess
  6. Apply heat to speed up the drying process

I’d love to hear how Q² Tire is working for you guys and answer any questions below!

Jeff McEachran
Jeff McEachran
GYEON
Facebook

4 comments on Gyeon quartz Q² Tire: Best Practices

  1. Chris says:

    Jeff…great informative articles. As you know I love Gyeon products, however it does not work well on continental dws06’s…I have tried everything and it does not apply well or look good when done…have you seen this on some tire brands? I have found that Gyeon Preseve works very well as a tire dressing!

    • Mike C. says:

      Hey, Chris. That’s interesting. My Conti 06’s don’t take coatings well either. I did my wife’s Bridgestone DriveGuards and they look awesome. The Contis look plasticky. I though I just applied the product wrong, but maybe it’s the tire. Hmmm.

  2. Ron Ayotte says:

    I never thought of using heat to speed the drying process on tire dressings… that is a great little “nugget” to keep in mind!

  3. David G. says:

    Michelin 35’s?!? Wow, looks like all wheel and no tire on your car. But it does look gorgeous.

Leave a Reply to David G. Cancel reply

Your email address will not be published. Required fields are marked *

Commenting Rules

  • Try to keep your comments as relevant as possible.
  • Don't be abusive: no personal attacks or any other nastiness.
  • Feel free to express your opinion, but do so in an eloquent way.

If you do not respect these rules your comments may be edited or even deleted.

My Offers
25 Off Brand Sale
Big Discounts While Supplies Last - Clearance Items - Shop Now
Quantity Discounts - Buy More, Save More!
Free Stuff
Close overlay