$4.99 Shipping over $49 w/coupon DI499 | 3,000+ Products | 95 Brands | 12,000+ Reviews | 1,850+ Detailing Articles
Close Menu
Clean ⋅ Shine ⋅ Protect
Cookies are disabled in your web browser. To shop with Detailed Image, please turn cookies on and then refresh the page.

How to Remove Spray Paint

by

spray

Removing spray paint from a vehicle can be a race against time. The faster you can get to it, the less time it can set and the easier it will be to remove.

spray

First, you are going to want to try something simple. Goo-gone or acetone can work well. Just dab some on a microfiber and on a small area where the spray paint is thinner see if it removes any at all.

If that does not work, you can try and use a clay bar. Keep in mind you will need a lot of lubricant as the paint will gum up the clay and it will need to be tossed after.

Next, you can try polishing it. Grab a microfiber pad and a compound like Menzerna Heavy Cut Compound 400. Use a little bit faster arm movement as you are not trying to perfect the paint at this point you are just trying to remove the spray paint. Clean it out very often and it will need to be tossed after.

If that does NOT work, you will have to resort to wet sanding. This can be hard as spray paint gets everywhere right? So, it can be difficult to sand in all those areas, and then even more difficult to then remove those sanding marks. If you get to this point you really need to asses the options and if it makes sense to try to improve it, or just get insurance involved for a re-paint.

clean back

clean back

clean back

Ian Martinez
Gloss Angeles
Irvine, CA
GlossAngelesDetailing.com
Instagram | YouTube

7 comments on How to Remove Spray Paint

  1. Cary says:

    Gyeon Tar is another option.

  2. Chris Messier says:

    Just in time. My client booked CSL+EXO for a ‘20 Ram 2500 and during the confirmation call, informed me that the vehicle was affected by overspray at a job site. Will be here tonight, the results should be interesting. Thanks for sharing this

  3. Jim says:

    Oven cleaner does wonders for removing overspray or painted lettering.

  4. Kim Newling says:

    have you tried Schafer 266 Citrol?

  5. Greg Baldwin says:

    Citrol 266 is pretty good at cutting through a lot of gunk. Definitely worth a try imo

  6. rlmccarty2000 says:

    I just had this “pleasure”. The spray paint had dotted the rear quarter panel and the trunk. I tried everything listed from Prepsol to Menzerma SH 300 and nothing really worked (I didn’t try wet sanding since it was small dots over a very large area). I did remove some of the paint by using a plastic razor blade and clay lube. I removed about 50% before deciding it was not worth the hassle (not my car). Remember PLASTIC razor blade not steel!

Leave a Reply to Chris Messier Cancel reply

Your email address will not be published. Required fields are marked *

Commenting Rules

  • Try to keep your comments as relevant as possible.
  • Don't be abusive: no personal attacks or any other nastiness.
  • Feel free to express your opinion, but do so in an eloquent way.

If you do not respect these rules your comments may be edited or even deleted.

My Offers
25 Off Brand Sale
Free Stuff
Big Discounts While Supplies Last - Clearance Items - Shop Now
Quantity Discounts - Buy More, Save More!
Close overlay