$4.99 Shipping over $49 w/coupon DI499 | 3,000+ Products | 95 Brands | 12,000+ Reviews | 1,850+ Detailing Articles
Close Menu
Clean ⋅ Shine ⋅ Protect
Cookies are disabled in your web browser. To shop with Detailed Image, please turn cookies on and then refresh the page.

Projects | Land Rover Defender 90 | Correction | Clear Bra | Coating

by

We had the pleasure of working on one of my favorite vehicles–the legendary and iconic Land Rover Defender. This vehicle just screams “I will conquer any terrain, get out of my way”.  It is just awesome.

This vehicle was purchased in Florida where it was restored by East Coast Defender, a company who specializes in restoring these amazing machines. When it arrived at our facility, we started out by giving it an initial visual inspection. At this point we began our planning process for one of the largest projects we had ever undertaken. This project would include extensive dismantling, parts cataloging, paint correction, clear bra, Modesta coatings and window film. It was a project that we would work on over the course of three weeks with a total of about 120 hours into it.

From our initial assessment of the vehicle, we determined that the paintwork was on the thin side, had major hazing and heavy scratching and required a multi-stage paint correction process to extract the kind of gloss the client wanted for his new vehicle. Basically, this Defender was going to be a driver, but the client wanted to it be the best-looking and most well protected driver out there. That was our mission–beautify and protect.

Land Rover Defender 90 Project

This project was broken up into four large categories: Dismantle, Paint Correction, Clear Bra, Coatings.

We started category one by removing the wide fender flares. We did this to give us greater access while polishing but also to hide the seams of the clear bra during installation.

All emblems, roof rails, lights, black plastic trim was removed to allow us to correct the paint as close to the edges as possible. We then cataloged the entire disassembly, creating tags for each specific piece.

Land Rover Defender 90 Project

We were shooting for 85%-95% defect removal on this one, but safe polishing was of the highest priority with this custom paint job. Paint measurements were taken along the way as we compounded and then refined the finish. Although we used a variety of polishes and pads, Meguiars M205 on a Rupes Yellow Pad did a great job of removing the heavy defects while Menzerna 85RD on a Lake Country Black Pad produced the clarity we were looking for.

Since this vehicle had so many intricate painted pieces to it, we ended up using the entire Rupes DA polishing lineup, Rupes 21LHR, Rupes Mini, and the Rupes iBrid Nano.

Land Rover Defender 90 Project

Land Rover Defender 90 Project

Land Rover Defender 90 Project

Once the paint correction steps were complete, it was time to rewash the vehicle and steam out all the body seams in order to prepare for the clear bra wrap. Let’s just say this vehicle had plenty of seams. Once the finish was free of polishing residue, we wiped the delicate paintwork down with Gyeon Prep.

Land Rover Defender 90 Project

We installed custom clear bra to the entire front end, doors, rear quarter panels and rear hatch.

After the clear bra installation, we turned our attention over to the Modesta Glass Coating installation. The paint would receive a combination of Modesta BC-04 topped with BC-08 to create a truly brilliant finish, worthy of this canvas.

BC-04 is a super thick, wet-applied coating that produces jaw-dropping gloss on dark finishes. BC-08 was really just our attempt to go for even more gloss, and it’s safe to say it turned out pretty darn shiny.

Land Rover Defender 90 Project

Land Rover Defender 90 Project

BC-04 being applied with a Detailed Image microfiber applicator pad.

Land Rover Defender 90 Project

After each layer of coating, we baked each panel with our Infratech IR cure lamp to accelerate the curing process and bring out its highest level of gloss. The wheels were also treated to a unique combination of Modesta BC-09 High Temperature Wheel Coating finished with a layer of BC-08.

Land Rover Defender 90 Project

Land Rover Defender 90 Project
Land Rover Defender 90 Project
Land Rover Defender 90 Project
Land Rover Defender 90 Project
Land Rover Defender 90 Project
Land Rover Defender 90 Project
Land Rover Defender 90 Project
Land Rover Defender 90 Project
Land Rover Defender 90 Project
Land Rover Defender 90 Project
Land Rover Defender 90 Project

All in all, this project was one of our largest but also one of our most rewarding. To take a 25 year old vehicle which had some aesthetic issues and transform it back to its former glory–Well that’s a fun work week in our book. We hope you enjoyed!

Buy Products From This Article

 

View Products Now

 

James Melfi
AutoNuvo
Holliston, MA
AutoNuvo.com
Facebook | Instagram

8 comments on Projects | Land Rover Defender 90 | Correction | Clear Bra | Coating

  1. Steve K says:

    Thank you for sharing, James. That was a lot of work meticulously completed. One of my favorite vehicles. I regret not buying one when I had the chance.

  2. Greg Pautler says:

    Wow that is a lot of work and the results look amazing! So glad you shared that with everyone, it was fun to see!

  3. Jean-Claude Corcoran says:

    STUN
    ING

    /jaw on the floor

Leave a Reply to james melfi Cancel reply

Your email address will not be published. Required fields are marked *

Commenting Rules

  • Try to keep your comments as relevant as possible.
  • Don't be abusive: no personal attacks or any other nastiness.
  • Feel free to express your opinion, but do so in an eloquent way.

If you do not respect these rules your comments may be edited or even deleted.

My Offers
25 Off Brand Sale
Quantity Discounts - Buy More, Save More!
Big Discounts While Supplies Last - Clearance Items - Shop Now
Free Stuff
Close overlay