I know the feeling. Take a deep breath. You do not necessarily need to panic. More importantly, I do not want you to engage in panicked behavior, trying to address this problem. I do not want you to turn a situation that is not necessarily quite as bad.
I was driving, entering the interstate, some kind of object boomeranged off of my tire to the side of my car. It was one of those miraculously unfortunate incidents that I have never experienced before and hopefully never again. I was not sure what had happened, until I was able to stop at a parking lot. I definitely was mortified. I took a deep breath and went least aggressive method (like I hope you all will) on up. I was not only surprised that step one worked, as usually the next step is necessary, but I was fortunate that it was not as bad as I feared at all.
Let’s get to the bottom of the issue with the least aggressive situation. I do have some advantages over the average car owner here. As the car has a professional ceramic coating. That does NOT mean it is a force field of scratch prevention protection!
My first step addressed much of the problem. Being somewhat dirty, I took one Eaglet microfiber towel soaked in DIY Rinseless wash and gently pressed on my working area. I want to moisten (pre soak) that spot.
Taking another damp towel with Eaglet Microfiber (though I recommend larger and thicker Eagle Edgeless Microfiber) soaked in a rinseless wash solution, gently wiped the working area. The transfer was removed.
This was surprising, the lack of damage behind it and the ease of removal here. There are some thin medium to heavy scratches (tough to see). But much better based on the sound and what I initially saw. I went from being horrified to mildly annoyed.
Realistically (especially if not immediately addressed) the next step involves Gyeon Tar“>Gyeon Tar or a tar remover you have access to if necessary.
The next step would involve the use of Gyeon Tar. I prefer and recommend Gyeon Tar as the next step in this situation. But I can see most other tar removers probably being effective as well. In all cases, make sure you read the instructions.
With Gyeon Tar you can spray it on the surface, but for these situations I recommend spraying on a microfiber towel and gently wiping the affected area.
Often the end result is not necessarily good, but not as bad as originally feared. Even if there is some major damage, you did not add to it and you have an assessment of the situation. After using Gyeon Tar make sure you wash the area, with at minimum a rinseless wash with a new microfiber towel.
