$4.99 Shipping over $49 w/coupon DI499 | 3,000+ Products | 95 Brands | 12,000+ Reviews | 1,850+ Detailing Articles
Close Menu
Clean ⋅ Shine ⋅ Protect
Cookies are disabled in your web browser. To shop with Detailed Image, please turn cookies on and then refresh the page.

Product Review and Application: Optimum Gloss-Coat

by

Here’s my final of 3 planned articles describing the application of the few coatings we use regularly.  The article on 22PLE VX3 was first, followed by CarPro CQuartz and finally my take on Optimum Gloss-Coat.  As mentioned, these 3 coatings are what we use on a regular basis when not using a pro-only coating, such as Optimum Opti-Coat or CQuartz Finest.  We mainly use VX3, but do regularly reach for Gloss-Coat (GC) as well.

The application of GC is very similar to VX3, almost the same to be exact.  After applying, GC starts to dry/haze…

LUSTR.OptimumGlossCoatApplication(1)

LUSTR.OptimumGlossCoatApplication(2)

LUSTR.OptimumGlossCoatApplication(3) LUSTR.OptimumGlossCoatApplication(4) LUSTR.OptimumGlossCoatApplication(5) LUSTR.OptimumGlossCoatApplication(6)

Like 22PLE VX3, it gives us a “rainbow effect” and shows up well on almost any paint.

LUSTR.OptimumGlossCoatApplication(7)

Unlike VX3 however, this doesn’t last long.  Gloss-Coat has the characteristic of “self-leveling” like OptiCoat, which makes it very easy to use.  This not only helps if you don’t fully wipe off a small section when removing it because it will basically disappear, but also helps in timing the removal of it.  Upon initial application, the entire panel shows up as colorful, like in the image above.  As time passes, the areas where it was applied thinner start to dry and self-level, whereas the high spots show up as colorful…

LUSTR.OptimumGlossCoatApplication(8) LUSTR.OptimumGlossCoatApplication(9) LUSTR.OptimumGlossCoatApplication(10) LUSTR.OptimumGlossCoatApplication(11) LUSTR.OptimumGlossCoatApplication(12) LUSTR.OptimumGlossCoatApplication(13)

I would still recommend timing the initial section or two, but the self-leveling aspect of it will tell you when it’s time to remove.  Once you get the timing down by using a stopwatch, start to check exactly how much of the coating has disappeared on the surface.  I would say once about 50% of it is gone, it’s time to wipe off soon after.  This isn’t an exact science, but it’s a great indicator as to when it’s safe to remove when you don’t have access to a timer.  Usually the time where we remove is in that 3-5 minute range, but in this situation I let it stay on the paint for about 7.5 minutes, yet it still wiped off effortlessly…

LUSTR.OptimumGlossCoatApplication(14) LUSTR.OptimumGlossCoatApplication(15) LUSTR.OptimumGlossCoatApplication(16) LUSTR.OptimumGlossCoatApplication(17)

When removing Gloss-Coat, you want to avoid dragging a dry towel across the surface too much.  I always use one side of the towel to wipe down the entire panel once, as a general wipe to remove most of the remaining coating.  Then, with the 2nd side and while there’s still residue to be removed, I once again go over the entire panel.  What this does is ensure that my towel stays “primed” with the coating residue and I’m not using a dry towel on a dry coating that’s in the middle of curing.

To better explain this… You want to do the opposite of what you do when removing a regular wax or sealant (or even 22PLE VX3 for that matter).  In the case of wax or sealant, you wipe off the residue, then switch to a clean side and do a final wipe just to make sure there’s no more residue remaining on the paint.  However, with Gloss-Coat, the point is to lightly glide the towel over the surface to pick up any high spots of the coating without disturbing the layer that’s already fairly dry.  That’s why it helps to only remove some with the initial wipe, then the rest with a final wipe.  Otherwise, if you’re running over the dried coating with a dry towel, think of it as touching paint that’s not wet but just dried to the lightest touch.  If you press it even slightly, you’ll leave a fingerprint, whereas with GC if you wipe it a bit too much with a dry towel, you’ll cause haze and marring.  This may not self-level and you may end up having to let the coating cure for a little while, polish the entire panel and re-coat.  No one wants to do that!

All in all I really like Gloss-Coat and have been extremely happy with it.  I do prefer 22PLE VX3 more because it’s a bit more user friendly and can be fixed much easier if you leave a spot of coating on the paint, but Gloss-Coat is my close 2nd choice and highly recommended.

Ivan Rajic LUSTR Deatil
Ivan Rajic
LUSTR Detail
257 N Woodwork Lane
Palatine IL 60067
LUSTRDetail.com
Facebook | Instagram

8 comments on Product Review and Application: Optimum Gloss-Coat

  1. Lomas says:

    Thanks for the detailed review. My ? To you is what’s the proper towel to wipe down could it be a waffle weave or a high GSM micro fiber or can I use those suede applicator ones that I see a lot when you apply coatings. Thanks

    • Ivan Rajic says:

      I prefer a shorter nap towel as the plush towels tend to leave streaks easier and lower quality towels can easily lint. I have found the best towel to be the Meguiar’s Supreme Shine.

  2. ClayR says:

    Great review Ivan, appreciate the pictures. Does anyone have any detail on if Gloss Coat is as durable as OptiCoat that it replaced?

    • Ivan Rajic says:

      Thanks Clay. It replaced OptiCoat 2.0 and yes it should have the same or better ~2 year durability. I haven’t personally tested that yet, but that’s what Optimum states.

  3. Jonathan Vincent says:

    Hey Ivan,
    I had started my car with Gtechniq EXO . I had one half the car finished until the bottle broke inside my pocket and went all over my leg..it stung a bit and made for a good laugh, but at the end of the day I was left without $50 worth of product. It would be days for them to ship another bottle so I got a quick syringe of optimum from Phil @DD. Big difference in my immediate reaction. It seems that the Gtechniq brought a lot more gloss to the finish, but optimum seemed like it was easier to apply being I didn’t have to follow as many rules and restrictions in terms of sunlight and getting it wet. Applying the Gtechniq meant I couldn’t drive the car til who knows how many hours later. I know the people from Gt require 2 coats whereas Optimum requires only one. I guess my main complaint would be the way optimum decided to package the product. That syringe was a pain in the butt to work with. My question would be, when it comes to these products is less more or is more better? I could never figure it out.

    • Ivan Rajic says:

      Hi Jonathan,

      I actually like the Syringe as it makes it easier to pour out as much product as you wish and easily screw on the small cap for storage. In any case, I don’t think it’s a “less is more” type of product, but at the same time you don’t want to apply heavy. You simply need to find that middle ground between the applicator actually drying up resulting in dragging/skipping on the paint and having so much product that it actually feels wet, like you’re moving water around. We normally put enough on the applicator to be able to cover about 1/4 of the hood or less with smooth strokes, however on the initial 1-2 sections you may want to apply a bit more product to prime the applicator.

  4. MarcusYang says:

    Optimum gloss-coat seems to be a fabulous option for cars. The description and pictures gives a clear about the facility. This seems to be a highly informative blog! http://www.sierraglow.sg/

  5. David says:

    What is the opti coat plus? Is it another name or glass coat

Leave a Reply to David Cancel reply

Your email address will not be published. Required fields are marked *

Commenting Rules

  • Try to keep your comments as relevant as possible.
  • Don't be abusive: no personal attacks or any other nastiness.
  • Feel free to express your opinion, but do so in an eloquent way.

If you do not respect these rules your comments may be edited or even deleted.

My Offers
25 Off Brand Sale
Quantity Discounts - Buy More, Save More!
Free Stuff
Big Discounts While Supplies Last - Clearance Items - Shop Now
Close overlay