Jescar All-In-One Polish and Wax Product Reviews
Customer Reviews
Great Correction And Finsh.
The first thing you'll notice is how smooth the buffing feels under the pad. I usually use a polishing foam of some type to work my polish waxes because I'm not going for as much correction as I am gloss.
The second thing you may notice is a difficult wipe off. It will not wipe off on the first pass. Much like a fussy ceramic coating, you need to remove the bulk with the first side of the microfiber towel, and buff with the clean side. You will be rewarded with a wet looking, high gloss finish - second to none. Don't let this scare you off as the results are worth it. Also, after a panel or two It's almost unnoticeable. I got spoiled on the easy wipe off of Meguiar's M06, D301, M20, and M21.
The third thing you may notice is that this stuff just doesn't dust up. I only ever do a maximum of four section passes, and some products can end up being a dusty mess in that amount of time. Not the Jescar All In One.
I can't speak to the durability of the acrylic protection it offers, but if the buff off is any indication, it should last for quite a while.
The entire Jescar line is my preferred line up of umiversal paint polishing liquids. They just always deliver. I look at them as high quality and high performance. Wether they're blended by a huge chemical empire, by Menzerna (rumored anyways), or a guy on staff blending these formulas, it doesn't matter. They just work. I can resurrect a beat up daily driver, or put bling like gloss on the finish of a Rolls. If I had to choose only one line, this would be it. The All In One is no exception.
The one issue I do have, is the caps on the 8oz bottles. They have a big round dispenser for the liquid to dispense from. This puts way too muah product on the pad, especially with the 1.5" pads. Was too much. I would encourage Jescar to use an integrated pop up cal, or one like Menzerna uses that allows for precision amounts of polish to be dispensed on the pad.
The first thing you'll notice is how smooth the buffing feels under the pad. I usually use a polishing foam of some type to work my polish waxes because I'm not going for as much correction as I am gloss.
The second thing you may notice is a difficult wipe off. It will not wipe off on the first pass. Much like a fussy ceramic coating, you need to remove the bulk with the first side of the microfiber towel, and buff with the clean side. You will be rewarded with a wet looking, high gloss finish - second to none. Don't let this scare you off as the results are worth it. Also, after a panel or two It's almost unnoticeable. I got spoiled on the easy wipe off of Meguiar's M06, D301, M20, and M21.
The third thing you may notice is that this stuff just doesn't dust up. I only ever do a maximum of four section passes, and some products can end up being a dusty mess in that amount of time. Not the Jescar All In One.
I can't speak to the durability of the acrylic protection it offers, but if the buff off is any indication, it should last for quite a while.
The entire Jescar line is my preferred line up of umiversal paint polishing liquids. They just always deliver. I look at them as high quality and high performance. Wether they're blended by a huge chemical empire, by Menzerna (rumored anyways), or a guy on staff blending these formulas, it doesn't matter. They just work. I can resurrect a beat up daily driver, or put bling like gloss on the finish of a Rolls. If I had to choose only one line, this would be it. The All In One is no exception.
The one issue I do have, is the caps on the 8oz bottles. They have a big round dispenser for the liquid to dispense from. This puts way too muah product on the pad, especially with the 1.5" pads. Was too much. I would encourage Jescar to use an integrated pop up cal, or one like Menzerna uses that allows for precision amounts of polish to be dispensed on the pad.
Reviewed by Abel C. on 2/6/2019
Would they buy this item again? Yes
Finally some good weather here, I used jescar JESCAR All in One, on soft black paint with green ccs polish pad, got a great finish on a nighthawk black Acura TL, great gloss. Little product goes long way dust free, long working time. Highly recommend
Definitely a solid polish and sealant. Worked great for me
Write a Review
Log in to write a review
Related Items
Related Categories
