Just tried for first time. Excellent wash mitt. Only gripe was mitt was a little stiff brand new. After done, softened up quite a bit. Hint: put a drop of pure soap on mitt before putting into water. Tons of foam during car wash afterwards.

Absolutely best thing to use to wash your vehicle. I bought one to try out & now I have 4 in my arsenal. Gave all my wash mitts to my brother. The only dig I have in this mitt is it's kind of a PITA to wring all the water out. Other than that I absolutely live it.

I like it, but you definitely need to be careful around letters and emblems. Threads will get stuck and or break off the decal. Just use it wisely. Hold liquid and soap well.

Great pad, soft and gentle on the paint yet tough enough when you need a little extra to remove road grime...Cleans up after use super easy too!

Great wash mit. It cleans well, isn't too large and is totally controlled, even when fully wet.

I have a small one and it's still twice as big as it should be.

pure garbage. just received it today. washed prior to use as i do everything, in cold water, gentle cycle, and the thing fell apart. one of the ends the stitching came out, and unbelievable amounts of white stringy lint. only positive i can say about it, is it is very soft. too bad it will never touch my car.

This just glides over my car..love it. Some people are complaining about the thickness, and it is thick, but it also holds a lot of water, so less trips to the bucket. My issue is that as I got it and and as I wash my car, I have notices fibers falling off of it. This worries me since I paid 15 bucks for the large ones and I was hoping they would last long.
Pro: Glides, so seems safer
Holds lots of water, less bucket trips

Cons: Perhaps some quality control issues
Fibers falling with unboxing and washing.

I'm not a fan and really prefer Autofiber Dragon Wash Pad due to it's lower profile design. This version is really thick and just absorbs water but doesn't release it without a good amount of effort. This results in a 5lbs mitt that is constantly saturated even when you're trying to rinse it out. I would like to try this again if the foam was 2/3 thinner.

I prefer pads over mitts. The microfibers are high quality and the pad holds lots of suds and glides nicely over paint with a quality soap. It is a bit thick though, maybe half an inch or so less foam thickness would make it perfect. As it is, when loaded with water, it tends to get a bit heavy and is difficult to navigate around tight spaces. A good pad but just a bit too thick.

I tried this because I like using a pad better than a mitt. This pad would be better if it had less foam inside. It's too thick to get into tight places like door handles. About 1/3 the amount of foam they put in this would be better. It is nice and soft. It glides real nice on the paint. Just too thick.