Not having much time to take and edit photos, I wanted to just do a quick writeup on this A7 we did earlier this year. We somehow lost all the before photos (happened before as well, I guess my cam doesn’t like the swirls!), but we have the important ones. Needless to say, the car was fairly hammered being driven for about 2 years with no polishing work done, but at the same time it’s an Audi and the swirls weren’t too severe. This is a car we actually polished and coated a few years back when it was brand new and he’s done as much as possible to keep it in great shape.
We only had to perform two stages of polishing, first with M105 and after with M205, using a Flex 3401. Meg’s Microfiber Cutting Dics were used with the M105 and White Lake Country pads were used with the M205. After correction we applied the 22ple VX1 Pro Glass Coating to the paint and on the front end, where there is a paint protection film as well. Here are some shots of the car outside and as you can see, it again looks better than new!
We did a “wheels off” detail on the new and pricey HRE wheels. They were protected with the 22ple VM1 Wheel Coating.
One of my favorite shots from the set, showing how glossy and mirror-like the car looked after the job was done.
It’s now looking great and well protected for a couple years! This client comes back every 1.5-2 years for a full correction, coating, wheel detailing and sometimes even to replace some protection film pieces if they take a beating or look worn. I’m sure we’ll be seeing him again in a little while, but for now we’ll let him enjoy the shine!
Buy Products From This Article
Purchase the products used in this article here!