CarPro is bringing several exciting new products to the detailing world at SEMA 2026! From new additions to its lineup to innovations designed to help detailers get even more out of their detailing routine, these latest releases are exciting to say the least! Check out the new CarPro products below for a closer look at what is coming next.

cQuartz UK 4

Developing the fourth generation of one of the most proven formulas on the market, we made sure to further improve every aspect that made CQUK a coating beloved by enthusiasts and pros alike. The new advanced blend of hybrid synthetic polymers esults in a glossier, slicker surface. On top of that, UK4 packs increased water spot resistance and even better durability of up to 3 years, matching even some of our pro-grade coatings. We also reworked the installation process by slowing down drying times allowing for an even more forgiving process, mitigating the need for speed and the possible risk of generating high spots. The time has come for the fourth generation.

cQuartz Aqua

cQuartz Aqua is an eco-friendly, water-base alternative to our existing coating lineup. Formulated to bond to almost any exterior surface (except glass), it delivers extreme hydrophobic self-cleaning, UV and chemical protection you expect from CQUARTZ, in a safer, more environmentally conscious application, while lasting up to 1 year. Because of minimal VOC content, Aqua goes on without the sharp odour or heavy ventilation demands of a traditional coating – a genuinely easier install in a home garage or an enclosed bay, and a more approachable entry point into the CQUARTZ range.

AlliN Compound

AllIn is a water-based, one-step vehicle correction polish. It removes defects, sanding haze or swirl marks up to 2500 grit, while delivering high clarity, gloss, and a hydrophobic base layer of protection. For jobs where a full multi stage correction isn’t the goal, ALLiN collapses cut, polish and base hydrophobic protection into one pass: a faster route to a corrected, protected finish for time-limited jobs, mobile details, or single-stage enhancements. DA machines only.

Reset Matte

Built on the same pH-neutral, alkaline-strength surfactant technology as our original Reset, Reset Matte is dosed with additional cleaning surfactants to cut through traffic film and grime on textured, low-gloss finishes. It contains no wax and no gloss enhancers, so the flat, non-reflective look of matte paint, matte PPF and matte wraps stays exactly as installed. Strong lubrication and easy, residue-free rinsing keep the wash safe for delicate matte topcoats, without a single trace of unwanted gloss.

RinseX Rinseless Wash

The formula breaks down traffic film and oil, safely lifting bonded grime without damaging existing paint protection. Highly concentrated and with dilution versatility, one bottle covers pre-soak, rinseless bucket wash, clay towel lubrication and post-polishing residue removal. Unlike other rinseless products we dont use silicones or any gloss enhancers. RinseX is the perfect solution for an efficient and effective wash when a proper rinse isn’t an option, or simply when speed is a priority.

Wheel Face Brush

Its medium-stiff 25mm bristles strike the perfect balance: firm enough to scrub old dressing, browning and road grime out of tyre rubber, yet gentle enough to be used on wheels. The compact head slips easily between the spokes to clean the wheel barrel, while the protective rubber edge guards against accidental knocks as you work around the rim.

PERL 2.0

Perl 2.0 keeps everything that made the original a staple: richness of colour restored on faded plastic, rubber, vinyl and leather, finishing matte to semi gloss depending on dilution. What’s new is a special acrylic resin which extends how long that finish and its water-repellency hold up. The result resists water spotting and rain marks more effectively than the original formula, while keeping the same sophisticated UV-inhibitors and safe-on- everything versatility: tyres, rubber, engine bay plastics, external trim and interior leather, all from one bottle.

DLUX 2.0

Dlux 2.0, has all of the original attributes you love, with the addition of a smoother, slicker surface and increased water spot resistance. DLUX 2.0 has been modified with hybrid synthetic siloxane, reducing its viscosity, whilst maintaining overall film thickness, protection, and simplifying application: when laid down evenly, buffing may not be required in many conditions. That same reduced viscosity also makes DLUX 2.0 more forgiving on wipe-off: even where a pass isn’t perfectly even, residue lifts away cleanly rather than requiring a second correction, making the whole install noticeably less fussy end to end.