Free Shipping over $149 w/coupon DIFree | 3,000+ Products | 95 Brands | 12,000+ Reviews | 1,850+ Detailing Articles
Close Menu
Clean ⋅ Shine ⋅ Protect
Cookies are disabled in your web browser. To shop with Detailed Image, please turn cookies on and then refresh the page.

8 comments on Ask-A-Pro: 2007 Infiniti G35 – Which Polish / Sealant / Wax & Pads?

  1. Mo says:

    Thanks for the write-up (even though I dont own an infiniti). I see more and more pros going to the 105/205 combo and i am definitely intrigued. Would you use this combo with a FLEX XC 3401 VRG? i am limited in the pad size i can use, but I love the power generated by this machine.

    • Hey Mo, thanks for the comment! You can definitely use the Flex DA. I have one, but it’s such a bear to use. I feel like it dusts a significant amount more than the PC–and when using M105 the dusting is bad enough! But, in short, yes–the Flex is a great machine, and a perfect candidate for the M105/205 combination.

  2. Tito says:

    Why do you recommend 2 different sizes? 2 5.5 inch pads and then 2 4 inch pads?

    • You’ll want the larger pads for the main surface areas of the car, and the small pads for the tight areas (bumpers, A-pillars, mirrors, etc).

      • Tito says:

        So I can use the 5.5 inch pads on a 4 inch backing plate?

        • Aaron Baumann says:

          I would not recommend it. You want to have the backing plate covering all of the back of the pad, save for an 1/8 inch or so. The reason being, the more backing plate on the pad, the more even the pressure is across the entire bad–providing more uniform and consistent results.

    • Aaron Baumann says:

      Yep! As Todd mentioned, it’s always good to keep at least two different pad sizes to get to the tighter areas of the car. As much as I love modern design–they car designers are making it very difficult to keep all the swirls out!

  3. Michael Hudson says:

    Hello all
    I know this is an older post but I now own a obsidian black 2015 Q50s and was wondering if the combo you speak about here would be the same as using a PC 7424 with chemical guys v36 with a blue hexlogic pad then v38 with black microfiber pad next, blacklight hybrid on a red hex logic let cure remove with a Microfiber towel and lastly BLACK – Luminous Glow Infusion wax applied by hand.

    Thank you in advance
    Michael

Leave a Reply to Tito Cancel reply

Your email address will not be published. Required fields are marked *

Commenting Rules

  • Try to keep your comments as relevant as possible.
  • Don't be abusive: no personal attacks or any other nastiness.
  • Feel free to express your opinion, but do so in an eloquent way.

If you do not respect these rules your comments may be edited or even deleted.

My Offers
25 Off Brand Sale
Free Stuff
Big Discounts While Supplies Last - Clearance Items - Shop Now
Quantity Discounts - Buy More, Save More!
Close overlay