Free Shipping over $149 w/coupon DIFree | 2,500+ Products | 88 Brands | 12,500+ Reviews | 1,650+ Detailing Articles
Close Menu

Ask a Pro Categories

Pro Detailer Authors

Other Authors



Clean ⋅ Shine ⋅ Protect

Ask a Pro Categories

Pro Detailer Authors

Other Authors



Cookies are disabled in your web browser. To shop with Detailed Image, please turn cookies on and then refresh the page.

BLO Car Dryer AIR-GT: Unboxing


This article is written by Jeff McEachran: Owner of Denver Auto Shield, National Brand Manager for Gyeon quartz USA, and National Brand Manager for BLO Car Dryer.

The BLO Car Dryer AIR-GT is one of the most feature-packed and powerful vehicle drying tools on the market. It uses a dual motor power plant that runs on 110 volts of electricity through a minimum of a 15 amp fuse. It has an adjustable airspeed nozzle that you can dial down when you want to delicately blow water out of a mirror or piece of trim or dial-up when you want to blast the water across the hood. It comes with a 26-foot air hose and a 16-foot power cord so you’ll rarely need to move the machine around. But when you do, it has four wheels to handle the rolling duties. Let’s open it up. Pull the contents out of the box and you’ll find:

  • The AIR-GT main tube and power unit
  • The 26-foot Air Hose
  • (2) Air Nozzles
  • A spare Rubber O Ring
  • The User Manual

air gt

The 26-foot air hose will expand when the machine turns on and retract when it is off.

hose and nozzles

You’ll find a spare rubber O Ring. This O Ring is a replacement for the seal between the Air Nozzle and Air Hose or between the Air Hose and the Power Unit. Keep this somewhere safe for future use.

o ring

o ring 2

Getting the BLO Car Dryer AIR-GT ready for use is very simple. First, attach the Air Hose to the Power Unit using the interlocking twist connector attached. Line up the cutout and insert the Air Hose coupler into the Power Unit. Now twist clockwise to tighten.

attaching hose

hose attached

Next, attach the Air Nozzle of your choice to the business end of the Air Hose. Follow the same protocol as before, lining up the insert and twisting tight.


nozzle attached

When it is time to clean out your Air Filter, simply remove the end cap of the Power Unit and remove the air filter.


filter 2

Find the nearest 110v outlet for the 16-foot power cord and plug it in. We recommend a 20 amp fuse, but 15 will usually do it.


Find the power switch on top of the handle for easy On/Off duties and an adjustable airspeed dial which will give you tons of airflow when you need it over large flat areas and a nice gentle push when drying small intricate areas.

on/off switch

The long power cord and air hose keep you from needing to move the machine much, but when you do there are 4 rotating and locking wheels to make it easy.

swivle casters

Now you’re ready to dry your car!

Jeff McEachran
Jeff McEachran
Englewood, CO

No comments yet. Be the first!

Leave a Reply

Your email address will not be published.

Commenting Rules

  • Try to keep your comments as relevant as possible.
  • Don't be abusive: no personal attacks or any other nastiness.
  • Feel free to express your opinion, but do so in an eloquent way.

If you do not respect these rules your comments may be edited or even deleted.

My Offers
20 Off Pads  5 Shipping
Big Discounts While Supplies Last - Clearance Items - Shop Now
Quantity Discounts - Buy More, Save More!
Free Stuff
Close overlay