$4.99 Shipping over $49 w/coupon DI499 | 3,000+ Products | 95 Brands | 12,000+ Reviews | 1,850+ Detailing Articles
Close Menu
Clean ⋅ Shine ⋅ Protect
Cookies are disabled in your web browser. To shop with Detailed Image, please turn cookies on and then refresh the page.

Meguiar’s Matte Finish Care

by

meguiars_matte_products

Some of you may have read some of our past matte care articles and recommendations. This pesky paint finish undoubtedly looks amazing, but it does have many things to watch out for when caring for it. Meguiar’s recently shared with us some great matte care recommendations and we wanted to take the time to share them with you. Below you will find Meguiar’s recommendations, along with links to some of the great articles our AAP Authors have taken the time to write.

Meguiar’s

Matte (no gloss) paint finishes have been around for many, many years. It dates back to the 1940’s when “hot rodding” was born. Rat Rods were one of the 1st cases paint with no gloss to it. In many cases, customizers could not afford paint, so the matte finish “primer look” was the perfect solution. In other cases, it was a counter-reaction to the high priced typical customs being built.

Today, you can find matte finishes in many forms. Vinyl, aftermarket refinish industry and even OEM’s are offering matte paint options to consumers. Lamborghini, BMW, Mercedes and Hyundai just to name a few. Bottom line, matte finishes are becoming more and more mainstream.

Keep in mind, there are many ways to create a matte paint finish. Primer is still used in some cases, single stage paints can be matte and even base coat clear coat finishes can have a matte appearance.

Regardless of the type of matte finish, care for them is similar yet very different than a traditional gloss paint job.

The main thing to remember with matte finishes is…you cannot remove oxidation, scratches, swirls, acid rain, or other below surface “defects” like you can with a traditional “glossy” paint finish. If you do use a compound, swirl remover, polish or wax with any kind of “cleaner” in it on a matte finish, you will begin to change the appearance of the matte finish. It will begin to look uneven and blotchy. As a result, it is vital that you do everything possible to not create scratches or swirls while caring for the vehicle on a regular basis.

Whether you have matte vinyl, a custom matte paint job, or an OEM matte paint job, there are several products that are safe to be used on these types of finishes to maintain and protect them. Here are some tips for keeping them looking their best!

Washing

  • Avoid most automatic carwashes, especially the “brush” style as they can create scratches that cannot be removed.
  • Always wash and dry the vehicle yourself for best results. All our car washes are safe and can be used on a matte finishes including Ultimate Wash & Wax Anywhere and Rinse Free Express Wash.
  • Premium microfiber wash mitts and premium microfiber drying cloths are a must. Poor quality, dirty toweling will create swirls and scratches that can’t be removed from a matte finish.
  • 2 buckets with Grit Guards in both buckets will also help reduce the chance of scratching.

Cleaning/Prepping

  • We do not recommend using clay, compound or swirls removers on matte finishes. If you do use a compound or swirl remover, the finish will begin to look blotchy and uneven. Unfortunately, there is no way to remove scratches, swirls, stains or any other below surface defect in matte finishes, so the key is to use the right product and techniques to start with.

Polishes

  • Polishes (cleaner/polishes or pure polish) should also be avoided. They will begin to change the appearance of the finish, and it will begin to look blotchy and uneven.

Waxes

  • Traditional liquid or paste waxes should not be used as they may also change the appearance of the matte finish. They could create blotchy and uneven appearance.
  • Spray waxes, like Ultimate Quik Wax (G175), Gold Class Premium Quik Wax (G77) and Synthetic Express Spray Wax (D156) are safe to use and work great to add protection without changing appearance of the matte finish. Make sure and use premium, clean microfiber towels to ensure a scratch and swirl free finish.

Maintenance

NOTE: If in doubt of what to use, contact the mfg of the vehicle, paint or wrap to confirm care instructions.

Other Matte Care Articles

9 comments on Meguiar’s Matte Finish Care

  1. John K. says:

    Reece great article. I just detailed a new jeep Cherokee with a matt stripe on the hood.I didn’t use anything on it. Now I know what to use. Thanks to this information. Will Vo7 by CG work ok?

    John

    • Reece @ DI says:

      I apologize for the slow response time! We had some issues with our comment notifications, but everything is all fixed now. The CG V7 should work great. I would however recommend testing it out on a small inconspicuous area first before applying it to the entire stripe.

  2. Dick says:

    I purchased a Foamaster ll from you. I don’t seem to be able to get the dense foam as advertised. It hook to just a outside hose bid, is this not enough pressure? or is my mixture to weak?

    thank you , Dick

    • Reece @ DI says:

      I apologize for the slow response time! We had some issues with our comment notifications, but everything is all fixed now. With our Foam Gun we recommend starting with 4 – 6 ounces of shampoo combined with 4 – 6 ounces of water on setting E. Each setting makes a big difference in the dilution rate and E is the richest or most sudsy one. You can try this ratio and see how it works for you and if you want more foam you can always add more shampoo later. You can certainly get away with less shampoo or use even more it’s really up to you. Again we recommend you experiment with it and see what works best for you!

      If you are looking for a thicker layer of foam, like pictured in this article (https://www.detailedimage.com/Ask-a-Pro/product-review-di-foam-lance/) you would need to purchase a Foam Lance and use a Pressure Washer.

  3. Mario St-Pierre says:

    to wash a car with matte paint finish would it be better use a genuine sheepskin wash mitt instead of a microfiber cloth ?

  4. Ken says:

    Can I use cmx ceramic spray on a matte finish?

    • Reece @ DI says:

      Ken – I would use only matte specific products on matte surfaces. This will help avoid any unintended gloss or streaks.

  5. Steve says:

    to wash a car with matte paint finish would it be better use a genuine sheepskin wash mitt instead of a microfiber cloth mitt?

    • Reece @ DI says:

      It really comes down to what you prefer. A premium microfiber wash mitt or sheepskin mitt will work great with a high quality shampoo and proper techniques.

Leave a Reply to Reece @ DI Cancel reply

Your email address will not be published. Required fields are marked *

Commenting Rules

  • Try to keep your comments as relevant as possible.
  • Don't be abusive: no personal attacks or any other nastiness.
  • Feel free to express your opinion, but do so in an eloquent way.

If you do not respect these rules your comments may be edited or even deleted.

My Offers
25 Off Brand Sale
Quantity Discounts - Buy More, Save More!
Free Stuff
Big Discounts While Supplies Last - Clearance Items - Shop Now
Close overlay