Free Shipping over $149 w/coupon DIFree | 3,000+ Products | 95 Brands | 12,000+ Reviews | 1,850+ Detailing Articles
Close Menu
Clean ⋅ Shine ⋅ Protect
Cookies are disabled in your web browser. To shop with Detailed Image, please turn cookies on and then refresh the page.

Product Review and Application: 22ple VX3 Signature Glass Coating

by

22ple is the first brand of coating I started using a few years back and I’ve always been impressed with it.  It was extremely easy to apply and the durability was as advertised.  A few months back we started using the new 22ple VX3 Signature Glass Coating and I was very happy to see that it only got better.  Using it was still very easy, but the timing to wipe off is a lot more consistent in varying temperatures.  It used to be anywhere from 3 minutes when warm to 8-10+ when cold, now it’s usually 3-6 minutes regardless of temperature.  It also now has an effect while drying that easily shows the product on the paint making it easier to see high spots and wipe them off on time.  I have yet to test the durability for anything more than 3 months, but it’s holding up great on a client’s car at 3 months and that was done without proper prep (applied straight on top of polish, no alcohol wipe down) for testing purposes.

In any case, this article is meant to give the 22ple VX3 a bit of a “good job!” and also show via many photos how it looks before, during and after application/removal.  So without further ado, onto the photos…

Here is a very old Chevy with single stage black paint.  We corrected the paint with one stage of polishing and applied VX3 for protection…

LUSTR.22PLEVX3Application(1)

A few drops on the applicator pad to start…

LUSTR.22PLEVX3Application(2)

I’m starting here in the middle of the hood with the intent to do the quarter of it.  You can see the small area to which I already applied some product is already showing the “new” characteristic of 22ple.  It has a rainbow effect that starts a few seconds after the product is applied, so it’s extremely easy to see it even in poor lighting or lighter paint colors…

LUSTR.22PLEVX3Application(3) LUSTR.22PLEVX3Application(4)

Here you can see how the look changes a bit as the product dries…

LUSTR.22PLEVX3Application(5) LUSTR.22PLEVX3Application(6) LUSTR.22PLEVX3Application(7)

After about 4 minutes, it was time to wipe off.  VX3 is VERY easy to wipe off.  We normally use one side of the towel for the initial wipe and then follow with a clean side right after for a final wipe.  This is a waste sometimes because even the one initial wipe removes all residue easily.

LUSTR.22PLEVX3Application(8) LUSTR.22PLEVX3Application(9)

Below is the same process shown but a bit closer and on the fender of the same car.  Applied liberally but not too thick…

LUSTR.22PLEVX3Application(10)

After about 10-15 seconds…

LUSTR.22PLEVX3Application(11)

~3 minutes…

LUSTR.22PLEVX3Application(12)

This is how the product looks when I simply wiped it once with a towel.  Not trying to wipe it off with one side of the towel, rather only gave it one wipe from left to right…

LUSTR.22PLEVX3Application(13)

A quick few wipes with the same side of the towel removed all the residue and leaves a nice and shiny surface…

LUSTR.22PLEVX3Application(14)

Lastly, I took some photos of us applying VX3 to a red Porsche, but in these there’s a direct LED light on the paint to show how it looks as it dries…

LUSTR.22PLEVX3Application(15) LUSTR.22PLEVX3Application(16)

Right after application…

LUSTR.22PLEVX3Application(17) LUSTR.22PLEVX3Application(18)

Starting to dry and change into all the wonderful colors :)…

LUSTR.22PLEVX3Application(19)

Easily seen on pure red paint…

LUSTR.22PLEVX3Application(20) LUSTR.22PLEVX3Application(21)

Here I wanted to experiment a bit and see how far I could push it before I run into trouble with removal…

LUSTR.22PLEVX3Application(22)

But even at 8.5 minutes, it wipe off effortlessly and left a nice perfect finish.  There are many deep scratches in the paint as it’s extremely thin and we didn’t want to polish too much on any of these cars…

LUSTR.22PLEVX3Application(23)

All in all, 22ple VX3 Signature Glass Coating is another great product from 22ple and we have been using it regularly ever since first trying it out.  I hope to get 1-1.5 years of durability out of it, so anything more will be a nice surprise.  One of the best things is that VX3 is even more affordable than the rest of the 22ple products, so it’s great for the DIY enthusiast who wants to protect their vehicle well.

Hope this is a bit educational to some and thanks as always for reading.

Ivan Rajic LUSTR Deatil
Ivan Rajic
LUSTR Detail
257 N Woodwork Lane
Palatine IL 60067
LUSTRDetail.com
Facebook | Instagram

25 comments on Product Review and Application: 22ple VX3 Signature Glass Coating

  1. Kevin George says:

    Great write up Ivan. I keep looking at 22ple, but just have not picked any up to play with yet.

  2. Ray says:

    I have a 2015 Chevy Corvette I am scared to put it on because I don’t want to get swirls How do you do the curved area?

    • Ivan Rajic says:

      I’m not sure what exactly you’re asking Ray? To avoid swirls, you want to ensure you have a freshly prepped paint (wash, decontaminate, polish and wipedown with alcohol or similar prep) then dust a few panels to which you’re applying just before applying. Obviously use a clean applicator pad and microfiber towel for removal.

      • Sam Florez says:

        Ivan I really appreciate that all of you guys on Detailed Image give very detailed instructions on using and applying products. It differentiates you guys from most, if not all other retailers. Quick question in regard to ‘dusting’, I’m assuming you do this immediately before applying your coating on each panel, and do you simply use a high quality, clean MF towel or something with more finesse like a suede towel? I’m curious as to how any leftover lint would affect the product even if it’s a very minimal amount. Thanks in advance for any input and advice.

        • Ivan Rajic says:

          Thanks for your comments Sam, really appreciate the kind words.

          You’re correct about dusting. At our shop, we’re doing one of two things and as with just about anything detailing related, it depends whether the car has sensitive (read black) paint or other. If it’s black, we’ll normally plan the day(s) out so that we do the finish polishing, prep and coating application in one day. With cars that have more resistant paint, we don’t mind if we do the finish polishing at the end of 1 day, then coat the next morning.

          If we do it right after polishing, our prep will include a proper wipedown and then a very light dusting (dry towel, normally the DI rethickulous) panel by panel as we apply the coating. This goes very quickly with two people, but if it’s just 1 person you would dust 2-3 panels (overlap of course), coat 2-3 panels, wipe off those 2-3 panels, then keep moving.

          If leaving it overnight, we’ll do a more thorough dusting, normally using Optimum No-rinse with the same rethickulous towel to get any dust buildup, then proceed to the same process as above (dust 2-3 panels, coat, wipe, etc.).

          I always like the thicker towels for dusting to minimize chance of causing swirl marks.

          Hope that helps!

  3. mbpress01 says:

    Hi Ivan, a quick question on this coating. I have bought the 30ml and can’t wait to apply it. A few questions:

    a) I don’t have enough time to do a full correction over a weekend and was wondering if you could apply the coating one – three panels at a time over a few days?
    b) The car will sit outside while the coating cures but I won’t apply it unless i know the humidity is normal and no rain forecast. I think it should be fine but wanted to ask about this.
    c) I have car pro eraser; can I use this to wipe the panels before application or do I need to mix an IPA.
    d) Finally, after I do the coating in the morning at night the car gets dew on it but this is after at least 12-13 hours. Any issues with this.

    Any responses are appreciated and looking forward to applying this product.

    • Ivan Rajic says:

      a. Yes you can just polish/prep a panel and apply the coating, then do a different panel(s) another day. The only downside is the efficiency goes out of the window, but since you don’t have the time it is what it is. I’d recommend separating it into sections where you can overlap a bit. What I mean is this… say one day you want to do hood and fenders. You can wash the whole car, then decontaminate, polish and prep those 3 panels and a good 6 inches or so onto the doors and a-pillars. That way when you come back to do the other panels, you don’t have to come close to the coated panels with the clay bar, decon pad or polisher.
      b. Fine except possible dust settling, so I’d try to avoid a windy day as well
      c. I believe it should be fine. We’ve done it many different ways (no alcohol or eraser prep at all, not that you should do it this way) and it still works just fine
      d. I really couldn’t tell you for sure, but it should be fine if it’s after 12+ hours.

  4. James Melfi says:

    great coating at a great price still blows me away ! Nice write up Ivan

  5. James Melfi says:

    I’ve been topping it over Mistico Elemento and those two together have been killer!

  6. Mike says:

    Ivan: Great article. I have a question – I recently used 22PLE VX3 on my Jet Black BMW. It came out awesome. However, I parked next to a construction site yesterday and I now have this fine grit stuck to my paint. It feels like sandpaper! So, can I use a fine clay eraser mitt and some clay lube without damaging/removing the 22PLE coating?

    • Ivan Rajic says:

      Sorry to hear Mike. You can surely try to remove the grit, but at the end of the day you’re probably going to marr up the coating enough to warrant polishing and polishing will remove some or all of it. I would plan for the worst and just decon it properly/fully, then polish and recoat, but you can surely try a lot of lube and clay bar to see how it goes. Another thing is maybe try some lime remover, etc. to try and break down the grit rather than abrading it away.

      • Mike says:

        Thanks for the reply. I plan on coating my other car soon so I’ll be buying some more product. I guess I’ll just decon it, re-polish, and re-coat. The car looked awesome though!

  7. Herman LOZADA says:

    What’s the difference car wax and coating?

    • Ivan Rajic says:

      Herman, without going into too much detail, a wax is short term protection of 1-6 moths (counting some polymer waxes) whereas a coating is MUCH better protection of 1-2+ years.

  8. Omar says:

    Thank you, Ivan. Question: what is that cloth wrapped around the Cquartz applicator and why are you using it? Also, can you use one foam or Cquartz applicator for the full car or do need more than one?

    • Ivan Rajic says:

      The cloth is a suede applicator towel and I normally use anywhere from 3-6 when doing a full car. Definitely can’t get away with 1-2 as they will harden as you go and not only be hard to use, but possibly even scratch the paint a bit.

  9. Jim McDermott says:

    Hi Ivan!! Just wondering for sure if application and removal are both done in circular motions, Thanks!! Jim

    • Ivan Rajic says:

      Hi Jim,

      I don’t do either in circular motions. I normally apply in one direction, then in the other over a small area (say have a fender or quarter of a hood). I feel like it gives a more even application. When removing any coating, I usually give a quick initial wipe in one direction (normally opposite of my last application wipe), then a final wipe in the other direction to remove everything. All of this is done in left-right, up-down movements. Hope that helps.

  10. Rock says:

    Ivan,we just purchased a new Lexus ES in September and I have washed it several times and it is always garaged.Since it is new, can i just apply the 22ple VX3 Signature Glass Coating after washing the car or do I need to do anything else before application. I am a rookie and wanting to do it right. Thanks for your response.

    • Ivan Rajic says:

      Rock, best would be for you to do at least one stage of polishing, then wipe it down with isopropyl alcohol/water mix and finally apply the coating. Decontaminate before polishing of course. This would ensure that the surface is clean, level and properly prepped for the coating, even if you didn’t remove all the swirl marks, etc.

      If the car is extremely clean in and good shape, I guess you may get away with washing it with an aggressive soap to strip any wax, then alcohol/water wipe, then coat. However I would not recommend this as you may just waste time and money on the coating that won’t last too long.

  11. Richard Manrique says:

    Ivan – Thank you very much for your reviews of the 3 coatings. Re Gloss Coat vs. VX3. My jet black Nissan lives in a car port open on two sides in Pac NW rural area and is daily driver. Due to nightly due, & ambient airborne dust would one of these product be quicker to “cure” than the other in terms of ambient dust sticking to the surface, or evening dew creating “spots” or other issues before a full 12 hrs of curing?

    • Ivan Rajic says:

      That’s a tricky situation and I would recommend simply finding a time and location where you can do it properly to ensure nothing negative happens to your hard work.

  12. PAUL DENNIS says:

    where to get it and how much

    • Reece @ DI says:

      Paul – You can click the link in the article and it will bring you directly to the product page for the VX3 on our site. From here you can add it to your cart and place an order whenever it is most convenient for you. If you have any questions please feel free to contact us here: https://www.detailedimage.com/Contact/

Leave a Reply to Sam Florez Cancel reply

Your email address will not be published. Required fields are marked *

Commenting Rules

  • Try to keep your comments as relevant as possible.
  • Don't be abusive: no personal attacks or any other nastiness.
  • Feel free to express your opinion, but do so in an eloquent way.

If you do not respect these rules your comments may be edited or even deleted.

My Offers
25 Off Brand Sale
Quantity Discounts - Buy More, Save More!
Free Stuff
Big Discounts While Supplies Last - Clearance Items - Shop Now
Close overlay