$4.99 Shipping over $49 w/coupon DI499 | 3,000+ Products | 95 Brands | 12,000+ Reviews | 1,850+ Detailing Articles
Close Menu
Clean ⋅ Shine ⋅ Protect
Cookies are disabled in your web browser. To shop with Detailed Image, please turn cookies on and then refresh the page.

Chemical Guys TORQ 10FX Random Orbital Polisher vs Meguiar’s MT300 Dual Action Polisher – First Reaction at SEMA 2014

by

MT300TORQ

SEMA 2014 was incredible, it brought so many new items to the detailing world but the Chemical Guys Torq Polisher and Meguiar’s MT300 Polisher were two of the most intriguing. Polishers have the unique ability to really change so much of your detailing routine so we always pay close attention to any new options. I was fortunate to use the Meguiar’s MT300 and watch demonstrations from Jason Rose and other experts at Meguiar’s. Chemical Guys was not demonstrating the unit on panels but I did get to hold it, crank it up to max speed and talk to Paul from Chemical Guys about it. Both companies put in a ton of time and research on each unit and have pushed their poker chips to the middle of the table with confidence that detailers will love their buffer.

Specifications

Chemical Guys TORQ 10FX:

  • 5.5 lbs
  • 8 mm Throw
  • 700 W Motor
  • 1,500 – 4,200 OPMs
  • Variable Speed Control
  • Digital Display
  • Smooth Start Up
  • Reduced Vibration Control

*Comes with two 6″ backing plates. One flexible and one stiff.

Meguiar’s MT300:

  • 8 mm Throw
  • 3,000 – 7,000 OPMs
  • Variable Speed Control
  • Smooth Start Up
  • Reduced Vibration Control
  • Billet Counterweight
  • Digital Torque Management

Observations

First and foremost please note my experience was extremely limited with them and much more testing needs to be done, but there is still a lot you can learn in a short period of time. While I didn’t measure the Torq it is little bit larger than the MT300, but it seemed slightly smaller than a buffer like the Rupes 21ES. Each has a slim profile which should make them easier to handle for long periods of time and easier to use in tight spaces. They felt solid in your hand and didn’t have any wild vibration or rattles while in use. We hope this means the quality is top notch and that these are tools you will use for years to come. I genuinely liked both units and I’d be surprised if either one is not a popular buffer.

Torq interestingly doesn’t have a trigger so I’ll be interested to see how much everyone enjoys this new style. It has an on and off switch, digital gauge and minus speed and plus speed button at the bottom near the cord. The placement seems good and with some repetition I think I could get use to this. If you accidentally turn it off and immediately turn it back on, the buffer will start at zero and wait for you to increase the speed, which is a nice safety feature. The digital gauge is something new to me, it visually let’s you know what speed setting you’ve selected better than any previous buffer I’ve used. Additionally, the speed reading is synched exactly with a change in speed of the buffer where as some older buffers the speed dial was an estimate. The minus and plus buttons for speed seemed small enough that you won’t accidentally hit them but large enough to use with ease. My only concern is that each time you turn it off, the unit resets to zero, therefore you have to hit the plus button a few times to get the speed back up if you’re polishing, but this is minor. Electronic feedback helps regulate the speed when pressure is applied. The construction seems very solid, all metal parts, no plastic that I noticed. Lastly, I really like that when laid on it’s back, with the pad facing up, it’s sturdy so changing pads and backing plates is much easier.

In the past I have not been a huge fan of bail handles like the MT300 has but they confirmed the bail handle can come off. This bail handle is much smaller compared to the ones on some older rotary buffers so it may be a different experience and I’ll reserve final judgement. At 7500 OPMs it still felt solid and easy to maneuver. The dial is just above your rear hand near the cord, so you should be able to adjust the speed with your thumb as needed. It has a soft start trigger to adjust the speed but you can lock it in as needed. I pushed on it slightly and it didn’t bog down, the Digital Torque Management will electronically adjust torque to keep a consistent speed. Meguiar’s seemed especially proud of the Billet Counter Weight w/Triple Bearing Design, which basically means they have three bearings instead of the old two to ensure it runs smoother and lasts longer. While I didn’t get to do any real paint correction I’m very confident this is a noticeable improvement over the former Meguiar’s G110v2.

Swirl Removal

This is a tough question to answer but I’ll speculate on what I’m expecting during testing. I think Chemical Guys aimed a bit higher and was willing to battle Rupes and Flex for the top spot amongst highest performing buffers. The throw is 8mm, but with a 700 Watt motor Chemical Guys seems confident we’ll see strong paint corrective power on par with the best in our industry. I’m guessing it will be somewhat close to what Rupes and Flex have achieved and the lower price could make this a really popular item. Meguiar’s seemed focused on making a unit better than their former G110v2 Buffer and Porter Cable 7424 XP. It appears they accomplished this objective and should have a very solid random orbital buffer that weekend detailers will love. I think it will have limitations on deeper RIDS and heavy paint correction in some instances but overall it has plenty of power for the majority of weekend detailers and many professionals will be happy to have it their arsenal.

Pricing

Chemical Guys buffer is listed at $199.99 so that makes it very enticing while the MT300 is priced at $219.99. These prices may adjust over time but both present reasonably good values and if the Chemical Guys unit performs as expected it could be an incredible deal.

Meguiar’s Specialty

There were a lot of pluses for the Chemical Guys Torq and I expect it to be a popular item, however after years of working with Meguiar’s I think they have one distinct advantage when they launch a new buffer like the MT300. Their system of polishing and protecting the paint is designed to be incredibly synergistic and simple. While that could seem like just some fancy marketing term I think there is a lot of truth to it. Whether it’s a pad, polish or buffer Meguiar’s works incredibly hard to ensure they all work together flawlessly. From what I’ve been told a product like the new MT300 is not developed in isolation, it has to work great with new and existing products. The money, manpower and passionate detailers Meguiar’s possesses allows them to do testing and refinement that is really unique. After so much testing they can really fine tune their product and complimentary products recommendations so you’ll be able to use Meguiar’s products start to finish with confidence. On top of that Meguiar’s does a great job color coding their products so it’s incredibly simplistic. For example their Finishing Wax is a grey color liquid and the matching pad is grey. I think many new detailers and weekend detailers will really appreciate the simplicity of pairing this buffer with other Meguiar’s products.

When Can I Get One?

Detailed Image has both buffers on order with each manufacturer and we’ll have them in stock as soon as they are available. We estimate we’ll have the Torq in stock around late November and the MT300 is closer to mid December. We’ll be posting dates on our social media pages as soon as we get the info. As most of you know the day we get them we will be shipping them out to customers as we normally do with new products, so there will be no delay!

Summary

Both units will likely have a place in the detailing industry and will be successful. More testing and polishing with these units will be the ultimate measuring stick for performance, so only time will tell. I’m excited to learn more about both units and get feedback from other detailers!

Chemical Guys TORQ 10FX Random Orbital Polisher - side view

Chemical Guys TORQ 10FX Random Orbital Polisher - top view

Meguiar's MT300 Buffer

Please check out the above video to see the MT300 in action!

13 comments on Chemical Guys TORQ 10FX Random Orbital Polisher vs Meguiar’s MT300 Dual Action Polisher – First Reaction at SEMA 2014

  1. Bob says:

    Thanks for the information on these two new polishers.Looking forward to a more detailed review to determine if it is worth replacing my PC7424XP.

    • Greg@DI says:

      We are hoping to have our Torq buffer before Thanksgiving so we’ll be able to update you soon after we receive it on it’s performance.

  2. John K. says:

    Greg,
    Nice write up on the polishers for not having the chance to really use them. I like the the Torq polisher myself. It looks like the Rupes style.I like the features. Because the Torq has less OPMs then the megs. Will this matter in results?

    John

    • Greg@DI says:

      Thanks! From my understanding OPMs is important but the power of the motor and other mechanical factors will influence how much power is actually distributed through the pad. I’m also wondering if the lower OPMs of the Torq will limit it’s performance but CG seems confident it won’t be an issue. Only time will tell and I’m hoping to be testing out the unit shortly.

  3. William Yelton says:

    I am a Newbie to the Buffer World and just trying to make the right choice. I am sure it is better to research and make sure that I buy the BEST Buffer available.

    Thanks for the Insight,

    Al

  4. Hi there,
    When will both these machines be released in 240volt for australia ?
    Cheers

  5. Jonathan Vincent says:

    Wow. That Meguiar’s rep seemed like a real nudge!

  6. Bruce says:

    Looks like a couple of awesome machines at a great price point w/ great features. Looking for a comparo between the two. Your guys thoughts & input.

  7. Scott says:

    That CG polisher looks awfully familiar *wink* in fact…. almost identical

  8. John K. says:

    Greg, what is your professional opinion on the torq and the Griots polishers. I’m undecided between the two. I like the Rupes 15 but out of my budget. The Torq compares close to the Rupes 15 by looking at your charts.

    Thanks,
    John

  9. Bruce says:

    Be great to see a comparo of these two machines & then toss in a Rupes Duetto to the mix. Looking for a machine for to keep my cars looking sharp w/o the vibrations.

  10. HelpfulJohn says:

    I like Meguiars MT300 – it is durable, lightweight, comfortable. Great for both professionals and beginners. Very little vibration. Could be a little noisy. For full list of pros and cons > https://www.helpful.reviews/en/product/38/meguiars-mt300-pro-power-da-polisher-review

Leave a Reply to Scott Cancel reply

Your email address will not be published. Required fields are marked *

Commenting Rules

  • Try to keep your comments as relevant as possible.
  • Don't be abusive: no personal attacks or any other nastiness.
  • Feel free to express your opinion, but do so in an eloquent way.

If you do not respect these rules your comments may be edited or even deleted.

My Offers
25 Off Brand Sale
Quantity Discounts - Buy More, Save More!
Free Stuff
Big Discounts While Supplies Last - Clearance Items - Shop Now
Close overlay