Collinite 390 Pre Wax Machine Correction Polish - 16 oz

Removes Defects & Achieve a High Gloss Finish That's Ready For Collinite's Signature Wax Protection

All new clear-coat safe, micro abrasive finishing polish eliminates minor paint defects like fine scratches/swirls, water spots, mild oxidation, clay marring, and wash marks from surface; finishing down to impart a smooth, high gloss shine while facilitating the easy application - and improving the bond of any of Collinite's last step durable wax coatings: 845, 476, or 915. Not for use on rubber or black trim.

Place finger over cap and shake well before using. Surface should be pre-cleaned (washed), dry and feel lukewarm (not hot) to the touch. For best results use DA polisher. BY MACHINE: Apply 3 pea-sized drops of No. 390 to preferred foam pad of choice. Work product into 2 x 2 ft section with firm pressure until clear residue appears, and remove with dry microfiber towel. Do not dry-buff. BY HAND: Apply small amount of product to microfiber applicator pad an spread evenly across 1 x 1 ft section at a time. Rub as necessary until product begins to dry. Immediately remove with microfiber towel. To obtain added shine and protective durability on polished surface, follow up with one of Collinite's last step waxes (No. 845, 476, or 915).