DI Accessories Spigot Faucet Top For Gallon Jugs Reviews

Be aware this spigot faucet will not fit all gallon jugs. I have this things installed on most of my daily use gallons to save time and product. This is definitely the way to go when refilling.

Perfect solution to your 1 gallon bottles. I have put these on p&s bottle, adams, superior - didn't fit one of the superior bottles. But have 9 other bottles that do and will order more for the rest. These keeps every nice and tidy and perfect for not wasting product filtering and the major benefit is that it's time saving for when you do your refills. Just turn the Collin bottle and fill up and done.

They do not fit my 1 gallon jugs, will not screw on at all, they just spin and no grip. Totally worthless. I use/bought standard 1 gallon jugs of distilled water.

Will definitely be using this on my other gallons, I use it on p&s express and like to shake it and mix to put in the bottle , foam would prevent me from filling all the way, with these , no more foam

They work alright at filling bottles but YOU have to manually burb the jug of whatever you are pouring to get a better flow of whatever you are pouring. All in all a good product that saves a lot of time.

Much more convenient and efficient then spilling product when refilling other containers.

These tops work great and help you not make messes in your work. They do exactly what you need them to do, they work great and I will definitely buy more.

Purchased 5 of these spigots for P&S, Adams, and JaxWax gallon containers and all worked flawlessly. The only drip that I get is whatever fluid was left in the outlet tube after closing the spigot. Great solution for filling the MTM foam cannon without using a screw-on funnel.

I think this might be the best purchase I've ever made that's detailing related. It's so annoying to spill when you're trying to pour from a gallon. It hurts more when it's an expensive chemical like ONR. With this, I might a spill a drop or two compared to like half a ounce before. This product has turned a horrible, annoying experience into a pleasant one. It will end up paying for itself in product savings. Buy it and you will not be disappointed.

These made pouring product from a gallon jug 100x better. No spill. Only problem I had was them threading onto the jug unevenly. It took some work to get them to sit and thread flush. Maybe it was the P&S gallon jugs that were the problem I don't know.

They work I just wish they included a little rubber stopper because you will have some leakage after closing the valve. They don't leak over time, just a little bit after filling a bottle.

Garbage, bought 5 and they all leaked after using on various gallon sizes of product! Wouldn't recommend.

Makes filling bottles easy with no mess.

Makes refilling bottles so easy and getting just the right amount out each time! No wasting more product then need be or spilling anymore. Only found 1 bottle so far it won't fit but I can make due with that since they fit everything else so far. Loved the first few I got, so ordered more! From a price standpoint you cannot beat them.

I bought this to try out on some P&B 1 gallon jugs I bought online. They are slightly smaller grooved than the jugs' thread, but manually pushing them to the left, seems to work. I also used this with the 128 oz opticlean jug, and it works flawlessly. The only downside, was I couldn't get one to fit on the Koch Chemie Gentle Snow Foam GSF 5 Liter bottle from Germany. I thought it was a nice touch that they drilled a hole on the close position, to prevent any stuck residue after dispensing. Will buy more if I upgrade from Bead Maker to Slipstream sealant.

I ordered 3 of these lids, and they work great! It's so much easier moving the product from gallon jugs to my spray bottles, not a drop spilled/wasted.

Can't wait to use it to refill 16oz bottles. Should prevent spillage and wasted product.

I got these faucet tops to make it easier to fill spray bottles from some of the gallon containers of product that I have. I was a little concerned that product would leak from the gallon containers but that didn't happen. The tops work perfectly with no leaks and make getting product into the spray bottles an easy task. Highly recommended.

Time and product saver!

Just what i was looking for works way better than a pump.

These work great for 1 gallon bottles and really help me get my dilution ratios correct, great way to fill bottles without spilling product.

Saves time and money by design. Absolutely ideal for thin liquids like all purpose cleaners, wheel cleaners, glass cleaners etc. Buy it if you want to be more precise. It's seriously cheap and a no brainier.

These work pretty good. They make diluting a lot easier and not as messy.

These work pretty good.

I'm using this on my Jugs I was using pumps on they are great makes filling up my bottles must better no waste of product as the pump does. and I don't have to have extra room as the pumps do, all the gallon containers are next to each other.

Makes it so easy to get dilution ratio's perfect with no spills, must have for 1gal containers.

Works great for liquids like Optimum No Rinse, Meguiars All Purpose Cleaner, and Adam's Rubber and Tire Cleaner. No leaks. Does not work great for viscous liquids like Adam's Soap, Optimum Opti-Bond, etc. Liquid dispenses very slowly and a lot gets caught in the tap.

These things make filling and diluting that more efficient. I have these on 6 jugs so far and all work perfect