Koch Chemie Active Foam - 1000 ml
$19.99
Ships tomorrow when ordered in the next 23 hrs 16 mins
Please note: discount codes do not apply to this item
Available Sizes
1000 ml
$19.99
Product Information
- High foaming maintenance shampoo great for any car
- Works great by hand or via Foam Cannon/Lance
- Pleasant sandalwood scent
- Product Code: 282001US
- Read full description
Product Description
The Koch Chemie Active Foam allows you to safely and easily remove dirt and grime from the exterior of your vehicle. Dirt, grime, tar and other heavy contamination buildup is inevitable unless you park your car in a garage and never take it out for a spin. This contamination can be a pain to remove, but with a good shampoo and wash process, you can safely remove most contamination. Active Foam is highly concentrated, phosphate and NTA-free with a great smelling and highly active foaming properties. This formulation makes it great for hand washing within gantry wash systems or in your favorite Foam Cannon or Lance. Just apply within your wash process and Active Foam will encapsulate dirt and grime, pulling it from the pours of your clear coat, while the rinse or wash mitt sweeps it away. The pleasant sandalwood scent makes cleaning enjoyable and once rinsed away, no film will be left on the surface. All you will be left with is a clean surface ready for polishing or protection. If you are looking to step up your shampoo game, reach for the Koch Chemie Active Foam!Dilution Ratio: 1:100
From The Label
Product Description
Highly concentrated, phosphate - and NT-free foam with intensive aroma. The extremely high ratio of anionic surfactants creates a unique foam formulation as well as an intensive and paintwork protecting cleaning performance.
Directions
Areas of use: Gantry washing systems, wash systems, self-service carwashes, hand washing, etc.
Instructions for use: Apply undiluted or diluted up to 1:10 with the dosing pump.
Recommended dosage per car: foam and self-service systems: 3 - 8 ml. Shampoo 1 - 3 ml. Hand wash: 1:300. Because of its higher product viscosity (lower delivery capacity of the dosing pumps) the product may have to be diluted beforehand.
VDA conform to class A: reaction time max. 5 min, max. application concentration 1:100. Before using, check suitability and compatibility. Do not let dry. VOC-safe application dilution: 1:100.
Instructions for use: Apply undiluted or diluted up to 1:10 with the dosing pump.
Recommended dosage per car: foam and self-service systems: 3 - 8 ml. Shampoo 1 - 3 ml. Hand wash: 1:300. Because of its higher product viscosity (lower delivery capacity of the dosing pumps) the product may have to be diluted beforehand.
VDA conform to class A: reaction time max. 5 min, max. application concentration 1:100. Before using, check suitability and compatibility. Do not let dry. VOC-safe application dilution: 1:100.
Customer Reviews
Pre-foaming sedan using 3 ml in a pump sprayer driven by mini air compressor, then pressure rinsing, cleaned all dirt and salt film leaving just one bird dropping that needed contact washing on unsealed sedan. Sedan was shiny and did not require a full contact wash. The 1L bottle purchased will last forever washing family vehicles. Koch Chemie knocked it out of the park with this Active Foam.
Customers Who Bought This Item Also Bought
Related Items
Related Categories
