McLaren Car Care Pro Series Snow Foam - 5 L
$64.99
Use coupon DI499 for $4.99 Shipping on this item
Ships today when ordered in the next 12 hrs 49 mins
Available Sizes
5 L
$64.99
Product Information
- Safely remove dirt and grime
- Safe on coated, sealed, and waxed vehicles
- Highly concentrated
- Product Code: MCLPRO98392
- Read full description
Product Description
The McLaren Car Care Pro Series Snow Foam is a shampoo specially formulated for safe care of all vehicles! You can use this shampoo in your two-bucket wash, however, where it really shines is in a foam cannon or foam lance. The intense foam clings to the surface, gently loosening road grime to allow for safe decontamination of the surface. With increased lubrication, dirt and grime will be readily removed by your wash mitt or pressure washer. Contamination will glide off the paint with ease, greatly reducing any wash-induced swirls or scratches. The formula is pH neutral and safe for coated, sealed, or waxed vehicles. Snow Foam is a very gentle wash so it will clean without stripping the paint of these protective layers. Foam up your vehicle with the McLaren Car Care Pro Series Snow Foam!Dilution:
- Foam gun : Dilute 1:5 to 1:10
- Hand Sprayer : 1:5 to 1:10
- For bucket : 100ml to 200 ml in a 20L bucket.
From The Label
Product Description
The McLaren's Snow Foam is the high performance, pH neutral foaming shampoo everyone needs in their detailing routine. Our concentrated formulation works extraordinarily well in foam guns, buckets or any other foaming accessories. The intense amount of cleaning foam created by this shampoo will allow the product to quickly release dirt from the surface while also lubricating it to avoid scratches during your washing process. The McLaren Snow Foam is pH neutral. It will not take away protection like waxes or ceramic coatings.
Directions
*Can be used with a foam gun or bucket.
*If the surface is heavily soiled, we recommend using the Pre Wash before this product.
*Rinse car thoroughly to remove loose dirt and debris.
Dilution Instructions: Dilute with water.
Foam Gun: Dilute 1:5 to 1:10
Hand Sprayer: 1:5 to 1:10
For bucket: 100 ml to 200 ml in a 20 L bucket.
Adjust to your preference and type of surface.
*If the surface is heavily soiled, we recommend using the Pre Wash before this product.
*Rinse car thoroughly to remove loose dirt and debris.
- For foam gun application, prepare your soap and water mix, then apply generously all over the place.
- For bucket use, we recommend the two gallon technique. (One gallon for the soap, one gallon to rinse the wash mitt).
- Wash the surface with a soft and clean wash mitt.
- Rinse thoroughly using clean water.
- Dry the surface with a soft touch drying towel.
Dilution Instructions: Dilute with water.
Foam Gun: Dilute 1:5 to 1:10
Hand Sprayer: 1:5 to 1:10
For bucket: 100 ml to 200 ml in a 20 L bucket.
Adjust to your preference and type of surface.
Customer Reviews
Sorry, there are no reviews yet. Be the first one to write a review!
Customers Who Bought This Item Also Bought
Related Items
Related Categories
