Autofiber Saver Applicator Half Microfiber Half Suede - 5"x 3.5" x 1"
$2.99
Ships tomorrow when ordered in the next 15 hrs 18 mins
Quantity
Discounts
| Quantity | Price | Savings | |
| 3 - 11 | $2.69 | 10% | Add 3 to Cart |
| 12 - 23 | $2.54 | 15% | Add 12 to Cart |
| 24 + | $2.39 | 20% | Add 24 to Cart |
Available Sizes
5"x 3.5" x 1"
$2.99
Product Information
- Applicator designed to safely apply protection products
- Hydrophobic interior layer blocks liquids from absorbing into the center
- Two sided, one side suede, the other microfiber
- Product Code: SSTX101GYB-CASE-AF
- Read full description
Packages That Include This Item
Product Description
The Autofiber Saver Applicator Half Microfiber Half Suede will help you apply your favorite coating or various other detailing products while reducing waste! Microfiber applicators are often used as they are extremely safe on your painted surfaces and help apply virtually any product nice and thin. However, the one drawback is they soak up a lot of product into the center sponge material which can be expensive and wasteful, especially with coatings. The Saver Applicator fixes this problem with its unique construction! Autofiber added a layer of a hydrophobic material between the microfiber exterior and sponge interior that blocks the absorption of liquids. It also limits excess product buildup which can become gummy and tacky as the coating begins to cure.The exterior features a two-tone look only to differentiate them from any standard microfiber applicators you have within your collection. The two sides function exactly the same. Check out the size options below!
Stop product waste and apply your protection products nice and thin with the Autofiber Saver Applicator Half Microfiber Half Suede!
Note:If you are looking for an applicator with a microfiber makeup, a softer suede makeup, a different size, different color combination, etc, check out the entire Saver Applicator lineup!
From The Label
Product Description
This microfiber coating applicator sponge has an added layer of a hydrophobic material between the microfiber and sponge. One side is terry microfiber the other is suede microfiber.
This prevents excess coating product from soaking through the microfiber into the sponge and limits excess product buildup which can become gummy and tacky as the coatings begin to cure. Saving product, time, and money!
This prevents excess coating product from soaking through the microfiber into the sponge and limits excess product buildup which can become gummy and tacky as the coatings begin to cure. Saving product, time, and money!
Customer Reviews
These have quickly became my go to for ceramic coating application. I have tried other, microfiber and foam included, and the suede side just applies so much better and smoother in my experience. Cant go wrong when using these!
Read all customer reviews of Autofiber Saver Applicator Half Microfiber Half Suede
