Autofiber Saver Applicator Thick Blue and Gray - 5"x3.5"x1.75"
$3.99
Ships today when ordered in the next 0 hr 33 mins
Quantity
Discounts
| Quantity | Price | Savings | |
| 3 - 11 | $3.59 | 10% | Add 3 to Cart |
| 12 - 23 | $3.39 | 15% | Add 12 to Cart |
| 24 + | $3.19 | 20% | Add 24 to Cart |
Available Sizes
5"x3.5"x1.75"
$3.99
Product Information
- Applicator designed to safely apply protection products
- Hydrophobic interior layer designed to reduce product waste
- Three size options
- Excellent for coatings
- Product Code: SX201GYB-CASE-AF
- Read full description
Product Description
The Autofiber Saver Applicator Thick Blue and Gray is the perfect applicator to apply your favorite coating or any other detailing product you love! Microfiber applicators are incredibly soft and perfect for delicate paint surfaces. The one drawback is they absorb too much products which can be very expensive and wasteful. This is especially true when working with coatings, which you want to apply nice and thin and use just enough product. The Saver Applicator fixes this problem with its unique construction. Autofiber added a layer of a hydrophobic material between the microfiber exterior and sponge interior. This prevents excess coating from soaking through the microfiber into the sponge. It also limits excess product buildup which can become gummy and tacky as the coating begins to cure. All these features make it ideal for coating applications and so much more!The exterior features a two-tone look to differentiate them from any standard microfiber applicators you have within your collection. The two sides function exactly the same. Check out the size options below!
Stop product waste and apply your protection products nice and thin with the Autofiber Saver Applicator Thick Blue and Gray!
Note:If you are looking for an applicator with a microfiber makeup, a softer suede makeup, a different size, different color combination, etc, check out the entire Saver Applicator lineup!
From The Label
Product Description
This microfiber coating applicator sponge has an added layer of a hydrophobic material between the microfiber and sponge.
This prevents excess coating product from soaking through the microfiber into the sponge and limits excess product buildup which can become gummy and tacky as the coating begins to cure. Saving product, time, and money!
This prevents excess coating product from soaking through the microfiber into the sponge and limits excess product buildup which can become gummy and tacky as the coating begins to cure. Saving product, time, and money!
Customer Reviews
Not sure I would buy it again. I am a little concerned about the corner stitching. It goes down to the flat surface that you would put against the paint and the corners are a bit hard. Concerned it will cause marring or light scratching.
Read all customer reviews of Autofiber Saver Applicator Thick Blue and Gray
