DIY Detail Water Spot Remover Reviews

Although it is advertised as a water spot remover (and it does work well as such), I primarily use it as a last step when "un-clogging" or "rejuvenating" a coating...

My process is to wash, chemically decontaminate (iron, sap, tar, bugs, etc.) the vehicle, physically decontaminate the vehicle (if necessary with either clay or clay towel), rinse the vehicle well and as a final step, spray DIY WSR liberally on a damp vehicle and into a damp soft MF towel, gently "massage" it into the surface, allow it to dwell as long as possible/comfortable without drying, rinse well (a hose usually works better than a pressure washer) and then dry the vehicle as normal. I do not know what the chemical mix is in this product, but it has brough back almost completely "dead" coatings for me more than once.

I find it to be cost effective and it works very well. I always keep several bottles on hand, as it is not available in gallon or 5 gallon sizes (hopefully these sizes are in the works). I would avoid using the product in the sun or on a hot vehicle as, if it dries on a vehicle, it can cause marring/spotting/etc.

This worked awesome. Really cleaned up the water behavior on my coating after winter. Highly recommend