CarPro Tar X Tar & Adhesive Remover - 500 ml
$17.99
Ships tomorrow when ordered in the next 35 hrs 55 mins
Please note: this product cannot be shipped through the air
Available Sizes
500 ml
$17.99
($0.04 / ml)
4 L
$117.99
($0.03 / ml)
1000 ml
$32.99
($0.03 / ml)
Product Information
- Safely remove tar, bug smear, road grime, and brake dust
- Citrus based cleaner that is non corrosive
- Thicker viscosity means it clings to the paint better and doesn't run easily
- Can be used safely all over the exterior
- This item can not be shipped, sold, or used in the state of California.
- Product Codes: CP-1796N, 17984, 1797
- Read full description
Product Description
The CarPro Tar X Tar and Adhesive Remover is far more than an ordinary degreaser so don't underestimate just how amazing this product is. It's a very strong yet relatively gentle product that can quickly remove not only tar but also asphalt, bug smear, tire marks, stubborn adhesives, road grime, brake dust and so much more. When you spray it on tar you can literally see the tar start to dissolve within seconds which saves you from scrubbing with too much arm pressure or using aggressive clay bar treatments.To explain why this formula is so advanced we'll start with how it's made. Tar X utilizes all of it's cleaning power from the solvents extracted from orange peels, which contain no chlorinated solvents or harsh chemicals so it's non corrosive. The number one ingredient in many cleaning product is actually water or fillers but Tar X boasts 60% active ingredients and a thicker viscosity that clings to the paint and won't run as fast.
Another original characteristic is the "glow color tracer" which you have to almost see to fully believe. When you spray it on the paint it leaves a neon green glow on the paint so you can see exactly where you have sprayed. In fact, this neon glow will quite literally glow in the dark if you use it at night, but it rinses clean with just a quick spray from the hose.
To apply it just spray it on the paint and wait about 1 - 2 minutes before rinsing it off or for stubborn build ups agitate with a soft sponge and rinse clean afterward. During use avoid direct sun and don't leave it on the exterior for more than 7 - 10 minutes, especially plastic parts. The only other precautions for the vehicle is to not use it on acrylic paints and work in a ventilated area. It's safe on fresh paint, vinyl films, chrome trim, vinyl/plastic trim, etc. again just don't leave it on excessively or dry up. After you apply it you'll be amazed at how much this formula can remove from the exterior because the tar literally melts away where as many other formulas just soften it up at best. Please remember despite the strong cleaning power you are using a citrus based cleaning product that is non corrosive.
If you choose to follow up with a clay bar you will have saved yourself a lot of time and the now clean surface will enhance the results of any polish, glaze, sealant or wax used afterward. The CarPro Tar X is truly an incredible product that is going to save you time and improve your results so pick some up today!
Important: This item cannot be shipped, sold, or used in the state of California. CARB in California claims this item breaks their VOC regulations.
Professional Detailer Reviews
With nearly all roads around the world being asphalt based, it is nearly impossible to not need a product like CarPro's Tar X Tar & Adhesive Remover. While darker colors do a great job of hiding tar spots, lighter colors such as white or silver show specks of tar very easily. Typical washing products will simply not do a good job of removing these marks in a safe timely manner, and that is where Tar-X comes in. This product really needs very little explanation as the name does a great job of describing what it does.
Videos
TarX on plastic trim
TAR X
TarX tar remover
From The Label
Product Description
Powerful tar & adhesives remover
Reduce intensive claying. Removes bonded organic contamination. Based on renewable solvent.
Reduce intensive claying. Removes bonded organic contamination. Based on renewable solvent.
Directions
- Shake well.
- Spray on a dry surface.
- Allow to react for 2-3 min. or brush/wipe on surface.
- Wash with car shampoo or power wash. Avoid leaving on for more than 7 ~ 10 min. Avoid spraying on acrylic paint. Avoid drying on plastic surface. Do not dry under direct sunshine.
Customer Reviews
This product works great and as designed. See ya later TAR!
I just used this on a car that was entirely coated in tree sap. Allowed it to site for about a minute in small sections and it worked amazing. I had to use a plastic razor blade to remove the sap dropping but the use of this product absolutely made the job happen.
Works as advertised. Really cuts down on the elbow grease!! Spray on and WAIT the suggested 2 minutes and adhesive effortlessly rubs off with a plastic scraper tool. Very satisfied.
Read all customer reviews of CarPro Tar X Tar & Adhesive Remover
Customers Who Bought This Item Also Bought
Related Categories