Gtechniq G4 Nanotech Glass Polish
$16.99
Available Sizes

100 ml
$16.99
Product Information
- Deep clean your glass surfaces!
- High quality, water-based formula
- Helps remove embedded contamination, etches, scratches, etc.
- Product Code: G4 0.1 x12
- Read full description
Product Description
The Gtechniq G4 Nanotech Glass Polish helps you deep clean your glass surfaces with ease! G4 is a water-based cleaner for glass surfaces that contains nano abrasives and citric acid. These high-quality ingredients allow you to remove acid rain, hard water, road film, sap, bird droppings, and even fine to medium scratches. It should not be used on tinted glass, aftermarket glass and coated glass surfaces. If you are looking to deep clean your glass surfaces, the Gtechniq G4 Nanotech Glass Polish is a great choice!Videos
How to use: G4 Nanotech Glass Polish
From The Label
Product Description
- Removes hard bonded contaminants with ease
- Absorbs silicones and oils
- Will not scratch glass
G4 Nanotech Glass Polish is a water based cleaner for glass and ceramics containing nano abrasives and citric acid which ensure a scratch and smear free finish every time.
G4 Nanotech Glass Polish represents a quantum shift in the effectiveness of glass polishing technology delivering previously unattainable polishing speed and effectiveness.
Using G4 is the ideal preparation prior to G1 or G5 application.
Directions
- Shake well before use
- Out of direct sunlight apply G4 to the surface and buff
- Remove excess product with a damp cloth
- Do not use G4 on scratch sensitive substrates such as acrylic
- Do not use G4 on acid sensitive materials such as stone
- Store in a cool and dry location
Customer Reviews
I use this to prep glass before applying G1 coatings. Works excellent and is easy to remove; much more liquid than most polishes so a little goes a long way.
I use this on my exterior glass surfaces as well as my outdoor glass tables. G4 may be a little stubborn to work with, but it gives great results. G4 is applied by hand and you can use anything from a standard foam applicator to a pad with mild cut. G4 does a great job of removing stubborn stuck on contaminants and water marks. The final results are impressive as you are left with a glass surface that almost looks like nothing is there in low light.
Some tips to work with G4. First, clean the surface with something like G6 prior to use with G4 to remove any loose debris . Second, invest in a MF6 towel. Have the MF6 towel be lightly damp for initial break down and one dry microfiber buffing towel for fine touch up. You may not need an MF6, but the MF6 makes quick work on removing stubborn products like G4.
Some tips to work with G4. First, clean the surface with something like G6 prior to use with G4 to remove any loose debris . Second, invest in a MF6 towel. Have the MF6 towel be lightly damp for initial break down and one dry microfiber buffing towel for fine touch up. You may not need an MF6, but the MF6 makes quick work on removing stubborn products like G4.
I used this with Car Pro Glass Rayon applicator and it did remove water spots prior to Gtechniq windshield protection application.
Read all customer reviews of Gtechniq G4 Nanotech Glass Polish