Scangrip I-Match 3
$94.99
This product qualifies for $4.99 Shipping with coupon DI499
Please note: this product cannot be shipped through the air
Product Information
- Hands free illumination while detailing!
- Great for inspecting paint or as a general work light
- Lightweight and durable construction
- 5 hours operating time from one charge
- Product Code: I-MATCH-3
- Read full description
Product Description
Illuminate anything you are working on, hands free, with the Scangrip I-Match 3! When detailing it always seems like you do not have enough hands to perform every detailing step desired at every moment. With the I-Match attached comfortably to your head, now you can light up dark sections of interiors, corners of engine bays, spot imperfections in the paint, etc. without using your hands. This leaves you with 2x hands to handle brushes, cleaners, polishes, polishers, microfiber towels, and anything else your heart desires!With COB LED technology, the rechargeable I-Match provides an extremely powerful illumination of light. The uniform, yet extremely wide beam, lights up your entire field of view. Compared to the I-Match the I-Match 3 features an all daylight function, offering 5 different colors temperatures depending on the type of job to be carried out. It also has a stepless dimmer function, enabling you to easily adjust the light output from 10% to 100%. It has been upgraded from 160 lumen to 250 lumen for more imperfection targeting. Typically, the warm light setting (4500K) is useful for bright surfaces, and cold light setting (6500K) is ideal for dark colored surfaces. By waving your hand in front of the lamp, you will switch on the light when needed. This sensor mode allows you to turn your I-Match on/off easily, even when wearing gloves! The battery can last up to five hours of usage so it can help you detail for long periods of time.
I-Match 3 features a comfortable and adjustable head strap, rechargeable battery, waterproof design, all while only weighing 100g, which is less than one third of a pound. Check out the specifications section below for more specs on this great light. What are you waiting for, pick up your Scangrip I-Match 3 today for hands free, easy lighting while detailing!
Specifications:
- Light Source: Ultra high CRI+ COB LED
- Luminous Flux: 25/250 lumen (min/max)
- Illuminance: 60/600 (min/max)
- CCT - 6500/2500
- CRI - RA>95
- Adjustable Light Output
- Beam Angle Main - 120 degrees (horizontal) * 60 degrees (vertical)
- Battery Capacity - 1600 mAh
- Battery Voltage - 3.80 V
- Charging Voltage - 5 V
- Charging Current - 1 A
- Charging Input Voltage - 100-240 V
- Operating Time: 15 hours at min lumen
- Operating Time: 1.50 hours at max lumen
- Charging Time: 3.50h
- Ingress Protection: IP65
- Impact Protection: IK07
- Operating Time: -10 to +40
Videos
I MATCH 3 - Superior headlamp for any detailing job
Introducing the new generation of specialized LED Work Lights for the painting industry
Customer Reviews
This is the first light I've bought for detailing and it's worth it. It's great to see better in interiors. Battery lasts for a while on medium brightness. I usually just turn it on when I need it and it's never died on me so far.
It has much better brightness and light output than the previous generation. It was very annoying that I had to assemble the strap to the light myself. It should just come with the strap pre installed for the money. It charges fast and I like that it shows when it's actually complete. Green light and notification on how close you're getting to full charge is nice.
I like the 5 color temperature and the ability to lower the light output, which I assume would help battery life. As I don't need full output of light all the time. The hands free swipe across to turn on works with black gloves now, which is good because the old generation did not.
I like the 5 color temperature and the ability to lower the light output, which I assume would help battery life. As I don't need full output of light all the time. The hands free swipe across to turn on works with black gloves now, which is good because the old generation did not.
Not a good as it advertises , stick with the Mach 2 instead. The light is not as bright , i had the lamp for 1 week and the motion sensor gave out. Now I have to make a claim with scangrip and they mentioned could be 4-5 weeks before i get a new on or it get fixed. So naw I wouldn't recommend it
Customers Who Bought This Item Also Bought
Related Items
Related Categories
