CarPro Ultracut - 250 ml
Out of Stock
$19.99
Available Sizes
250 ml
$19.99
($0.08 / ml)
500 ml
$32.99
($0.07 / ml)
1000 ml
$51.99
($0.05 / ml)
Product Information
- Remove heavy imperfections safely and easily
- Low dusting formula
- Suitable on various paint finishes
- Product Codes: UC25, UC50, UC1L
- Read full description
Product Description
CarPro Ultracut is a heavy corrective compound designed to help you remove severe imperfections safely and easily. Removing heavy swirls, scratches, oxidation, RIDS, and more can simply put, be a pain. This process can be extremely time consuming and many times take multiple polishing steps to correct. UItracut is packed with fully diminishing abrasives, which correct heavy defects while producing minimal haze. Pair this compound with your favorite compounding or heavy cutting pad for extremely effective and efficient defect removal. One of the best features is that while the correction results are top-notch, the formula is low dusting and finishes down extremely well. On most paint types you can get away with just one follow-up pad and fine polish combo to finish down to perfection. Ultracut was designed to be used with rotary polishers, but works extremely well with dual action and forced rotation units as well. Remove heavy imperfections with the CarPro Ultracut!From The Label
Product Description
Extreme cut compound
- Low dusting
- Silicone-free
- Extremely versatile cutting on all paint finishes
Directions
- Prime a clean dry pad with a very thin worked-in layer of compound and add an additional 3 - 4 pea sized drops of UltraCut.
- Spread product across a section.
- Raise speed to HIGH (4-5).
- Use MIN pressure for first 2-3 passes and increase with each pass.
- Blow air on pads often.
- Keep polisher on LOW speed (1000 - 1200 RPM).
- Use MIN pressure for first 2-3 passes and increase with each pass up to MAX.
- Finish with LOW pressure.
- When scratches disappear or the polish has become clear, wipe clean with a MF towel.
- Clean pad.
- Move to next section, apply 2-4 pea-sized drops to the pad and repeat steps.
-
For D/A
-
For Rotary
Customer Reviews
My go to in the past has been Meguiars 110, think I've found my new go to, this cuts as well if not better without as much dust!
Very nice compound!
Low to no dust, powerful cut, great finish, easy wipe off.
This could be a candidate for a go to heavy cut compound. Right up there with Sonax Ultimate Cut, Jescar Correction Compound, and Meguiar's M110.
Low to no dust, powerful cut, great finish, easy wipe off.
This could be a candidate for a go to heavy cut compound. Right up there with Sonax Ultimate Cut, Jescar Correction Compound, and Meguiar's M110.
Customers Who Bought This Item Also Bought
Related Items
Related Categories
