Gtechniq W6 Iron and General Fallout Remover
$16.99
Available Sizes
250 ml
$9.99
($0.04 / ml)
500 ml
$16.99
($0.03 / ml)
5 L
$94.99
($0.02 / ml)
Product Information
- Remove brake dust and fallout from your paint and rims!
- Thick gel like formula clings to the surface for enhanced cleaning
- Mist, let dwell, rinse away, it is that easy!
- Product Codes: W6 0.25 x12, W6 0.5 x6, W6 5 x2
- Read full description
Packages That Include This Item
Product Description
The Gtechniq W6 Iron and General Fallout Remover helps dissolve harmful fallout and brake dust fast and easy! This thick gel-like formula is easy to spray onto the surface and it clings, allowing the formula to stay on the surface longer. This allows the high quality formula to remove more fallout than other liquid formulas that run down the surface too fast! For any heavily contaminated areas we recommend agitating the surface with a clean wash mitt or sponge. After application, be sure to rinse the paint thoroughly. W6 will leave your paint or wheels cleaner than before and ready for you to polish or apply a wax or sealant. Rust deposits, industrial dust, lime deposits, brake dust, and other contaminants are no match for this strong formula. Even though it is strong, it is still pretty gentle. According to Gtechniq it will not damage any coating that you already have applied. This makes it a great maintenance product for your coated car! In addition to the fantastic cleaning capabilities, W6 has a corrosion inhibitor in the formula, which is an additive that is designed to combat the effects of acid rain. So what are you waiting for, thoroughly clean the surface of your vehicle with the Gtechniq W6 Iron and General Fallout Remover!Videos
Gtechniq W6 Iron and General Fallout Remover - Wheel Cleaning & More
From The Label
Product Description
W6 Iron and General Fallout Remover is formulated to offer you the safest and most effective method of removing potentially damaging fallout found on your vehicles paintwork and rims.
In addition to its exceptional fallout removing function, W6 also has a corrosion inhibitor, plus an additive designed to combat the effects of acid rain. It is a thick gel-like formula that will cling to vertical surfaces.
In addition to its exceptional fallout removing function, W6 also has a corrosion inhibitor, plus an additive designed to combat the effects of acid rain. It is a thick gel-like formula that will cling to vertical surfaces.
- Dissolves fallout & brake dust fast
- Does not damage wax or coatings
- High-cling formula
Directions
STORAGE & USE
- Use in a well ventilated area out of direct sunlight as the product has a very strong and unpleasant odour.
- Remove loose dirt using a hose or jet wash
- Spray W6 directly onto the surface and allow to dwell for 5-10 minutes. Any ferrous particles will dissolve forming a purple solution.
- Do not allow product to dry on the surface.
- Rinse residue and repeat if necessary.
Customer Reviews
This is hands down my favorite fallout and iron decon, I have used Meg's D1081, Iron Buster, and CG Iron Decon. This clings so well, works super well on really trashed wheels. Do not hesitate to use it 2 or 3 rounds on bad wheels or embedded particles in paint.
My go to wheel cleaner. Works very well . Smell could be improved but can overlook it b/c product works so well
I bought this because I was planning to polish my jeep for the first time ever, and I needed to do a full decontamination. Also, this was available in 250 mL, and it was one of the cheapest Iron Removers available.
The first thing that hits you is the horrible smell, but from research, this is common for all iron removers. I used this product everywhere on my jeep, from the roof and glass, to the body panels and wheels. As advertised, shortly after spraying the product turned purple, particularly on wheels, but even on the roof. After rinsing, I couldn't see any visible improvement on the body, as it's a black jeep. But the wheels - they were were looking super clean.
Would recommend due to price, and effectiveness. If you're not a professional detailer, or if you have only 1 vehicle, I don't think you'd need more than this 250 mL bottle.
The first thing that hits you is the horrible smell, but from research, this is common for all iron removers. I used this product everywhere on my jeep, from the roof and glass, to the body panels and wheels. As advertised, shortly after spraying the product turned purple, particularly on wheels, but even on the roof. After rinsing, I couldn't see any visible improvement on the body, as it's a black jeep. But the wheels - they were were looking super clean.
Would recommend due to price, and effectiveness. If you're not a professional detailer, or if you have only 1 vehicle, I don't think you'd need more than this 250 mL bottle.
Read all customer reviews of Gtechniq W6 Iron and General Fallout Remover
