Jescar Heavy Cut Compound
$40.99
Available Sizes
8 oz
$19.99
($2.50 / oz)
32 oz
$40.99
($1.28 / oz)
Product Information
- Eliminate heavy imperfections fast and easy
- Removes P1200 sanding marks
- Silicone free and body shop safe formula
- Product Codes: J-HCC-8, J-HCCQ
- Read full description
Product Description
The Jescar Heavy Cut Compound will help you remove heavy imperfections safely and easily. When polishing, we always recommend using the least aggressive pad and polish combo possible. However, sometimes you just need a heavy polish that will take care of swirls, scratches, RIDS, oxidation, and other noticeable imperfections in the paint. Heavy Cut Compound uses an advanced formula to take care of imperfections like this, along with P1200 grit sanding marks with ease. It is suitable for all paint systems and fiberglass gel coats. Use it by hand, or via polisher, with wool, or foam pads, it is very versatile and safe. This formula is silicon-free and produces a minimal amount of dusting. This compound will finish down extremely well, however, you may need to follow up with a lighter pad/polish combo to remove any compounding haze. Grab a bottle of Jescar Heavy Cut Compound and remove ugly imperfections today!From The Label
Product Description
Machine polishing compound developed using an advanced formula for elimination of minimum P1200 grit sanding marks on fresh paint, and deep scratches and oxidation on weathered paint. Suitable for all paint systems and fiberglass gelcoat. Can be used with wool or foam pads on either a rotary or dual action polishing machine. silicone-free and safe for all paint areas.
Directions
Shake before using. Avoid working on hot surfaces or in direct sunlight for the best results. Apply 3 to 4 pea-sized drops of Heavy Cut Compound over the surface of the polishing pad and work in a 2'x2' area using medium pressure and speed (1200-1800 rpm) until all of the defects have been removed. Clean area with microfiber cloth and then follow with Jescar Medium or Finishing Polish if necessary to bring surface to an ultra-high gloss finish. Store in sealed bottle, avoiding freezing or very hot temperatures.
Customer Reviews
Reviewed by KESHORE M. on 10/22/2022
Would they buy this item again? Yes
YES.
Jescar sent me a sample to test. Heavy cut compound, I had no doubt that this will not disappoint since I had lots of experience with correction compound and got exceptional results.
Let me tell you, I was in for quite a surprise!
This compound is quite gritty, there is "no if, no but no maybe " this compound cuts, and like no other. The finish is one of the best I have experienced. Working on a Toyota Hilux with a beated tail gate, I was able to bring it back to 90% correction with near zero haze which is rarely unheard of when using microfiber.
Jescar Heavy Cut is what I currently use and will continue to use. You can go from Jescar Heavy Cut to Jescar Micro Finishing.
This compound is that good. Well done Jescar and much thanks to DI for bring this to the store !
Jescar sent me a sample to test. Heavy cut compound, I had no doubt that this will not disappoint since I had lots of experience with correction compound and got exceptional results.
Let me tell you, I was in for quite a surprise!
This compound is quite gritty, there is "no if, no but no maybe " this compound cuts, and like no other. The finish is one of the best I have experienced. Working on a Toyota Hilux with a beated tail gate, I was able to bring it back to 90% correction with near zero haze which is rarely unheard of when using microfiber.
Jescar Heavy Cut is what I currently use and will continue to use. You can go from Jescar Heavy Cut to Jescar Micro Finishing.
This compound is that good. Well done Jescar and much thanks to DI for bring this to the store !
Customers Who Bought This Item Also Bought
Related Items
Related Categories
