Jescar Medium Polish
($2.50 / oz)
($1.44 / oz)
- Remove light to medium imperfections safely and easily
- Finishes down extremely well
- Silicone free and body shop safe
- Product Codes: J-MP-8, J-MPQ
- Read full description
Customers Who Bought This Item Also Bought
Product DescriptionThe Jescar Medium Polish helps you remove light to medium imperfections safely and easily! Medium Polish is positioned between the Jescar Correcting Compound (Heavy Correction) and Micro Finishing Polish (Light Correction & Finishing) and helps you remove light swirls, RIDS, oxidation, watermarks and other imperfections. Apply 3-4 pea sized drops to your polishing pad and work in one section at a time. Using medium pressure move side to side then up and down until the polish breaks down, leaving a clear film over the surface. Wipe away the excess polish and you will be left with a nice clear surface. Most of the time this polish will leave you ready to apply your favorite wax or sealant, but if you need an extra finishing step, grab the Jescar Micro Finishing Polish. Don't let imperfections ruin your paint finish, use the Jescar Medium Polish and remove them!
Jescar Polishing System:
From The Label
- Eliminates 2500 grit sanding marks, oxidation and scratches
- Silicone-free, Paint Area Safe, No Dusting, and Easy Cleaning
- Safe for all Clear Coat Paint
- Leaves a Deep High Gloss Finish in One Step
Machine polishing compound formula with a new generation of high performance aluminum oxide suitable for all paint system including scratch-resistant clear coats. Eliminates scratches caused by automatic car washes and daily use and 2500 grit sanding marks on fresh paint leaving a deep high gloss finish. Can be used with wool or foam pads on either rotary or dual action polishing machine. Silicone-free and safe for all paint areas.
Shake before using. Avoid working on hot surfaces or in direct sunlight for best results. Apply 3 to 4 pea sized drops of Jescar Medium Polish evenly over the surface of a foam polishing pad. Work in a 2'x2' area using medium pressure and speed (1200-1800 rpm) until defects are removed and the polish breaks down leaving a clear film over the surface. Wipe off the residue with a microfiber cloth. For ultimate surface protection follow with Jescar Power Lock Plus polymer sealant.
Sorry, there are no reviews yet. Be the first one to write a review!