I used this product based on a recommendation from a neighbor. We both are diy detailers and have become very proficient at detailing and paint correcting. I spent 2 days making sure the paint was clean and perfect on my Lexus IS350. Applied two coats of P&S legend. Easy to apply and wipe off. Did all paint and trim with a 30ml bottle with a bit leftover. A year later it is still holding strong. I top it occasionally with P&S Beadmaker. I was so impressed with the product I recently used P&S Legend on my F150 pickup truck. I used the larger 50ml bottle and it took every drop with two coats. Great coating, I highly recommend.

I bought 2 bottles. 1st up... my neighbors 2018 Lincoln MXZ Silver. Process - ONR Wash. Clayed with Rag Company Utimate Clay Towel. Rewashed. 1 step polish with Medium Polish pad and Optimum Hyper Polish. Removed with damp ONR towel. Then wiped down with P&S Paint Surface Prep. For application of Legend, the 1st panel (hood) I didn't prime the pad enough, wipe off was really grabby. I learned to lay it on thick, let it sweat, then wiped off like butter. Let it sit about 45seconds. Wiped off with Rag Company Pearl towel and Rag Company Creature edgeless 2nd wipe (Levi Gates trick). I did the whole car, 1 coat, with 1/2 bottle. I did all windows too (not windshield). I did a second coat about 1hr later. Only used 1/4 on 2nd coat, still had 1/4 left. I use the last 1/4 on rim faces. and hit the plastic trim one more time for good measure. 2hrs later the application pad was Crusty. I mean like rock hard. It's only been a week, so no feedback yet. But it looked really wet and glossy. Reminded me of CSL Exo. I didn't top it with anything yet, was going to wait until after 1st wash.