Rupes DA Fine Polishing Foam Pad Yellow Reviews

Love Rupes pads. One of the best.

Be very careful on ordering these Rupes pads. The sizes that are listed are misleading. The 6-inch pad is really a 5-inch pad. I ordered six pads and had to send them all back, at my expense, because they were too small for my Rupes Big Foot and Flex 3401 polishers mounting plates. You need to order a 7-inch pad to fit those polishers with a 6-inch mounting plate.

There pads are cult favorites for a reason. They are the best in there class. Once the pads get broken in and gets to operating temp.... perfection!

Awesome 1 inch pad on the flex pxe 80. Use it on rotary and 12mm DA.

Can't go wrong with this pad after a compound process.

These pads work great teamed up with the right compound. Results are top notch

Rupes pads are a benchmark in the industry. The new design with its contoured edge, allows for more surface area and control. If you started paint correction on a rotary like I did 24 years ago, you will appreciate this new design, as it is like the pads of old-but better. The foam on the yellow is great for a one step, and also finishes down as good, if not better, than the Rupes white. The yellow pad, should be your number one tool in your arsenal. The most consistent pad on the market.

Such a smooth buff; comparatively, my old pads seem like they had so much drag.

Works great even on my non rupes 3" machine.

Great pad!!! Typical Rupes quality. The thinner profile and edge design are a noticeable improvement on DA's vs. their other pads (that are still great pads!!!). White and yellow DA pads feel and cut very similar to there other white and yellow pads. The Blue DA pad is similar to the Green pad.