Ultimate Washing & Drying Kit
2x Sheepskin Wash Mitts
1x Lake Country Blue Grout Sponge
1x Chemical Guys Maxi Suds II
1x Glass Scrub 8oz
2x Grit Guards
2x Microfiber Waffle Weave Drying Towel (36″x24″)
1x P21S Auto Wash 1000ml
1x Foam Applicator Pad

In this package we have provided you everything you need to complete a thorough and safe washing and drying process. Start off by cleaning your glass with the deep cleaning power of the Glass Science Glass Scrub. Simply apply a nickel sized drop of product on your foam applicator pad and buff it on the glass in a circular motion with medium pressure. Make sure the glass is wet to begin with and thoroughly rinse the glass as soon as you are done.

Now rinse the whole vehicle down so it’s wet and begin spraying the P21S Auto Wash on areas that have stubborn build ups. The P21S Auto Wash is a citrus degreaser designed to safely loosen contaminants from virtually every surface on your vehicle. Agitate these build-ups with light to medium pressure with the Lake Country Blue Grout Sponge.  After you are done, rinse the vehicle down and begin your regular washing process.

Place your Grit Guards in the bottom of two 5 gallon buckets and fill them both about two/thirds full with water. In one bucket add 1 – 2 ounces of the Chemical Guys Maxi Suds II and add more water to create a foam lather. Dip your Sheepskin Wash Mitt in the Shampoo and water solution and wash your vehicle from the top down. After washing 1 – 2 panels dip your mitt in the bucket with just water and lightly wipe the mitt against the Grit Guard to help loosen and separate contaminants from the mitt. This will help you wash safer because there is less risk of grinding in contaminants attached to the mitt. Wring out your mitt and then put it back in the shampoo and water mix and repeat this process. Rinse the vehicle frequently during this process and thoroughly when you are done.

After completing your wash pull your vehicle in to a shaded area if you were not already in one. Using your Microfiber Waffle Weave Drying Towel blot dry the surface of your paint. This is the process by which you place the down on the vehicle and let it absorb the water, then pick it up and move it to a new area to repeat this process. By not dragging the towel you help reduce the risk of grinding in any contaminants that could be left on the surface or in the towel.

After completing this process we you can use a clay bar, polish, glaze, sealant and wax to further clean, shine and protect your vehicle. We encourage you to look at our Polish and Protection Packages and other Packages to help complete a thorough detail. To purchase the Ultimate Washing and Drying Kit please click here.

Polish & Protection Starter Kit
1x DI Accessories Gentle Fine Grade Clay Bar
1x Poorboy’s World Spray and Wipe 16 oz
1x Menzerna Intensive Polish
1x Menzerna Final Polish II
1x Poorboy’s World EX-P
1x Poorboy’s World Natty’s Blue Paste Wax
1x Microfiber Applicator Pad

Fully maximizing the results of this process will require that you use a buffer like the ones found in our Porter Cable 7424 Packages or the Flex XC 3401 VRG. Our Microfiber Packages will also help you remove the left over polish, wax, clay lube, etc. from the paint quickly and easily.The Polish and Protection Starter Kit is an excellent package that takes you through all the steps needed to make your paint look like new again. After you have washed the vehicle you would be amazed at just how much contamination will still remain on the paint. Removing all of these contaminants while washing is nearly impossible but using a clay bar will solve this problem. The DI Accessories Gentle Fine Grade Clay Bar will make the clear coat smoother and more transparent. Simply spray the Poorboy’s World Spray and Wipe over a small area (2ft x 2ft) and glide the bar back and forth with light pressure. Remove the excess clay lube with a clean microfiber towel.

Polishing is the step where you can really take your paint to the next level. Swirls, oxidation, fine scratches, etchings, water marks and more can make the paint look dull and faded. Polishes will help remove those imperfections and restore a transparent clear coat, which is needed for the maximum shine. The Menzerna Intensive Polish is a medium cutting polish that will smooth out the clear coat so it’s smoother and more vibrant. This process may leave a very light haze on the surface that is to be expected. The haze will be fully removed with the next step, which is to apply the Menzerna Final Polish II. This light polish or finishing polish is designed to leave the paint extremely smooth and glossy.

After you have cleaned and smoothed out the clear coat with the clay bar and polishes it’s important to protect the surface. This will help prevent future build-ups and enhance the shine. We have selected the Poorboy’s World EX-P for this job because it’s an outstanding sealant. It will protect your paint for 3 – 6 months, add a highly reflective shine while being very easy to apply and remove. The last step we recommend is hand applying the Poorboy’s World Natty’s Blue Paste Wax with a Microfiber Applicator Pad. This carnauba wax will give you the “hard candy” appearance that makes the paint look very glossy. The wax will further protect the paint and really take the shine up a notch.

Completing this process is very rewarding and the results are often a dramatic improvement. To learn more about each part of this process and to get step by step instructions please read our Detailing Guide. To maximize the results from this package we recommend you apply the products with one of our Porter Cable 7424 Packages or the Flex XC 3401 VRG Packages. Using a buffer with the right pads will help you more thoroughly work in the product while saving you lots of energy. To help remove the excess product you should also look in to our Microfiber Packages.

Polish & Protection Perfection
1x Clay Magic Fine Grade Bar
1x Poorboy’s World Spray and Wipe 32oz
1x Trigger Spray Top
1x Menzerna Power Gloss
1x Menzerna Super Intensive Polish
1x Menzerna PO106FF
1x Menzerna Finishing Touch Glaze
1x Menzerna Full Molecular Jacket
1x Pinnacle Souveran Paste Wax
5x 4oz Dispenser Bottles

After a thorough washing you will have removed most of the loose contaminants from the vehicle’s surface. Many other contaminants are embedded in the clear coat and bond to its surface. These contaminants can be removed with a clay bar. Simply spray the Poorboy’s World Spray and Wipe over a small section (2ft x 2ft) and gently glide the Clay Magic Fine Grade Clay Bar side to side with light pressure. The bar will pull away contaminants and leave the surface much smoother and cleaner.

We have included 5x 4oz Dispenser Bottles with this package so you can pour the polishes into the smaller sized containers. The dispenser bottles have fine tipped spouts so you can more accurately distribute the product on your applicator and they fit right in your pocket. Polishing the paint is the process where micro-abrasive particles are worked in to the surface to smooth out imperfections. This process is totally safe and provides the most dramatic improvement in the aesthetics of your paint and clear coat. Imperfections like swirls, watermarks, fine scratches, etc. cause light to fragment in various directions, thus creating a dull shine. When you remove imperfections you allow light to pass directly through the clear coat for a much deeper reflection. Additionally a smoother surface will allow the future steps like glaze, sealant and wax to adhere to the surface much better. To remove these imperfections we have selected the premier polishes in the world created by Menzerna in Germany. The first step is to use the Menzerna Power Gloss, which is a heavy cutting polish designed to remove deeper imperfections. The Power Gloss may leave a light haze or micro-marring on the surface which is totally normal and will be fully removed by the next two steps. Next use the Menzerna Super Intensive Polish which is a medium cutting polish. This polish will further reduce the appearance of imperfections and remove the haze from the previous step. The last step is to apply the Menzerna PO106FF which is a light cutting or finishing polish. This polish ensures the surface is extremely smooth and glossy.

The clay bar and polishes have now cleaned and smoothed the clear coat, so it’s perfectly prepped. Now it’s time to enhance the gloss and protect the surface. We’ll apply the Menzerna Finishing Touch Glaze first for added gloss. The Menzerna Finishing Touch Glaze has kaolin oils in it, which will cling to any imperfection and fill it in for a perfectly uniform finish. Lock in this gloss and protect the surface with the Menzerna Full Molecular Jacket. This outstanding sealant is extremely easy to apply and remove, protects for 4 – 6 months and looks very sharp and reflective. The last step is where you can really add that “wow” factor with the Pinnacle Souveran Paste Wax. This wax has very high carnauba content which makes the paint look like it has endless depth and gloss. After you complete this process your paint will have an exquisite shine that really makes the paint stand out and turn heads. Select this package today and you’ll be thrilled with the outstanding results from this package.

To optimize this package we recommend you apply these products with the Porter Cable 7424 Packages or the Flex XC 3401 VRG Packages. These buffer and pads will help you get better results than hand applications while expending less energy. To learn more about using these buffers or any part of this process we recommend you read our Detailing Guide, which has more information and step by step instructions. We also recommend our Microfiber Packages to help you remove excess product safely and effectively.

Ultimate Interior Care
1x Leatherique Prestine Clean 16oz
1x Leatherique Rejuvenator Oil 16oz
1x 303 Cleaner and Spot Remover 32oz
1x 303 Aerospace Protectant 32oz
1x 303 Fabric Guard 16oz
1x Plexus 13oz
1x Chemical Guys Window Clean
1x Firm Bristle Brush
2x Terry Cloth Applicator Pads
12x All Purpose Microfiber Towels
2x Glass Microfiber Towels

The Ultimate Interior Kit is everything you need to really make your interior look its best again. You will have all the products you need to treat virtually every surface inside of your vehicle so they are clean and protected. The Leatherique Rejuvenator Oil and Leatherique Prestine Clean are some of the world’s finest leather and leatherette (synthetic leather) care products. Apply the Rejuvenator Oil first with a Terry Cloth Applicator Pad or by hand and let it sit for at least one hour. We recommend applying 2 – 4 ounces per seat depending on how much product is absorbed in by the leather. If you can back the car into direct sunlight or turn on heated seats it will help the product be absorbed by the leather. This formula will penetrate deep in to the leather and help nourish the leather. Next apply the Leatherique Prestine Clean directly on top of the seats with a Terry Cloth Applicator Pad and let it sit for at least 15 minutes. Then take a damp All Purpose Microfiber Towel and wipe down the seats to help remove contaminants that have risen to the surface and excess product. Follow up with a dry All Purpose Microfiber Towel to remove any remaining moisture or residue.

The 303 Cleaner and Spot Remover is a very versatile product that works extremely well. Mist it on your fabrics or directly spray stains and agitate the area with the Firm Bristle Brush from multiple directions. Apply 1 – 2 sprays of the Cleaner and Spot Remover to a clean All Purpose Microfiber Towel and you can clean all of your vehicle’s vinyl surfaces. Typically it works best on your dashboard, console, doors, arm rests, trim, etc. Protect your vinyl, plastic, leather (synthetic or coated), rubber and more with the 303 Aerospace Protectant. This product provides a beautiful matte finish that leaves the surface looking bold but not oily to the touch. Most importantly it will coat those surfaces with a UV protectant that helps block out harmful UV rays that cause “slow-fade”. Apply 1 – 2 sprays on a clean All Purpose Microfiber Towel and wipe down your dashboard, doors, arm rests, seats, trim and more. You can also use this product on the exterior trim, tires, engine bay and more. Protect your fabrics with the 303 Fabric Guard. Simply spray this product on your fabric surfaces and it will help prevent contaminants from staining the fabric. Spills will happen and the 303 Fabric Guard will be there to protect your fabrics. The Plexus Cleaner, Protectant and Polish is a great all in one step that will leave any plastic surface looking its best. Apply a light mist of the Plexus to a clean All Purpose Microfiber Towel and wipe coated hard wood, gauges and DVD and Navigation screens. It will clean the surface and leave anti-static properties behind to help repel dust, etc.

For crystal clear glass we recommend you use the Chemical Guys Window Clean, 2x All Purpose Microfiber Towels and 1x Glass Microfiber Towel. Spray a light mist of the Chemical Guys Window Clean directly on an All Purpose Microfiber Towel and wipe the interior glass down. Upon completion remove the majority of the cleaning solution with a separate slightly damp All Purpose Microfiber Towel. Lastly use the Glass Microfiber Towel to do a final wipe down and ensure no streaks are left behind. This towel has a special low nap design to make solid contact with the surface and leave no residue behind.

To learn more about any of these products you may want to read our Detailing Guide. This section has lots of supplemental information and step by step guides. Purchase the Ultimate Interior Kit and you’ll be thrilled at the quality of each product we have selected. We have used these products personally and professionally and they consistently provide the highest quality detailing results. Give your interior the care it deserves with this package today. To compliment this kit you may want to also use the extremely powerful and compact Metro Vac N Blo. This vacuum has all of the features and attachments that make it the perfect fit for any detailer.

Interior Starter Kit
1x Poorboy’s World Leather Stuff
1x 303 Cleaner and Spot Remover
1x 303 Aerospace Protectant
1x Chemical Guys Window Clean
1X Terry Cloth Applicator Pad
5x All Purpose Microfiber Towels
1x Glass Microfiber Towel

The Interior Starter Kit is a well balanced package of all the essential items to caring for your interior. The Poorboy’s World Leather Stuff is an excellent all in one product for leather care. It will clean, condition and protect the leather all in one step. This will help your leather stay clean and healthy for years to come. Pour a quarter sized drop of the Leather Stuff on a Terry Cloth Applicator Pad and work it in to the seats with light to medium pressure. Let the product sit for at least 15 minutes and then remove the excess product and contaminants that have risen to the surface with an All Purpose Microfiber Towel. Your leather will instantly look and feel much better after just one application.To clean your carpets, console, dashboard, doors, arm rest and more simply use the 303 Cleaner and Spot Remover. Simply spray this product directly on fabrics you want to clean or apply it to a clean All Purpose Microfiber Towel and wipe the desired area. The microfiber towel and cleaning solution will gently separates and collect contaminants for a highly efficient cleaning process.  To protect your vinyl, rubber, plastic and leather surfaces you can apply a light coating of the 303 Aerospace Protectant. 1- 2 sprays of this solution on an All Purpose Microfiber Towel will give you enough product to coat your interior and protect it from harmful UV rays that cause fading. It also adds a nice matte finish with no greasy residue.

Clean and clear glass can be achieved when you have the right products and techniques. This package gives you the products you need with the Chemical Guys Window Clean, 2x All Purpose Microfiber Towels and 1x Glass Microfiber Towel. Spray a light mist of the Chemical Guys Window Clean directly on an All Purpose Microfiber Towel and wipe the interior glass down. Upon completion remove the majority of the cleaning solution with a separate slightly damp All Purpose Microfiber Towel. Lastly use the Glass Microfiber Towel to do a final wipe down and ensure no streaks are left behind. This towel has a special low nap design to make solid contact with the surface and leave no residue behind.

To purchase this package please click here on the Interior Detailing Starter Kit. To learn more about any of these products you may want to read our Detailing Guide. This section has lots of supplemental information and step by step guides. You may also want to consider purchasing the Metro Vac N Blo to complete your interior detailing needs. This vacuum is perfect for auto detailing and around the house because it has tons of great features and plenty of power.