Autofiber Paint Decontamination Clay Mitt
! We're sorry, this item is currently out of stock
This item is currently on backorder. Orders containing this item will ship as soon as we have the Autofiber Paint Decontamination Clay Mitt in stock. Estimated ship date: 6/30/23.
$15.99
Product Information
- Remove embedded contamination fast and easy
- Leave your paint clean and ready for polishing, waxing, etc.
- Easy to hold and maneuver mitt
- Medium grade clay mitt
- Also available as a towel
- Product Code: CLAY-MITT-1
- Read full description
Product Description
The Autofiber Paint Decontamination Clay Mitt will help you remove embedded contamination quicker than a traditional clay bar! Tar, bug smear, brake dust, road grime, etc. can be incredibly difficult to remove but this towel makes it so much easier. The medium grade synthetic rubber polymer pulls embedded debris from the surface leaving it smooth and ready for paint correction. Best yet, the mitt is easy to hold an maneuver across the paint. It should always be used with a clay lubricant or quick detail spray designed to lubricate the surface when using a clay bar or clay bar alternative. Spray the mitt and surface being cleaned with lubricant and gently rub in a crosshatch pattern applying more lubricant as needed. The clay mitt will help you perform the exact process a clay bar gives you, but it will save you time and effort. When finished, thoroughly rinse the mitt with water and air-dry before storing. Your paint will feel super smooth and it will be left ready for any polishing, waxing, sealing, etc. process you have planned. Pick up the Autofiber Paint Decontamination Clay Mitt and remove embedded contamination with ease!Important: New mitts should be broken in by agitating on a lubricated glass surface for 1-2 min.
Also available as a clay towel.
From The Label
Product Description
Remove surface contaminates like brake dust, industrial fallout, overspray and environmental pollution with the easy to use Decon Clay Mitt. The synthetic rubber polymer pulls embedded debris from the clear coat leaving it smooth and ready for paint correction.
Directions
The Clay Mitt should always be used with a clay lubricant or quick detail spray designed to lubricate the surface when decontaminating. New mitts should be broken in by agitating on a glass surface for 1-2 min. with the lubricant.
Spray the mitt and surface being cleaned with lubricant and gently rub in a crosshatch pattern applying more lubricant as needed. Thoroughly rinse the mitt with water and air-dry when done.
Spray the mitt and surface being cleaned with lubricant and gently rub in a crosshatch pattern applying more lubricant as needed. Thoroughly rinse the mitt with water and air-dry when done.
Customer Reviews
Reviewed by JASON N. on 12/22/2022
Would they buy this item again? No
I have used this a few times. It does not seem to remove contaminants as easily as a clay bar, but it is much faster if the vehicle is not very contaminated. It will leave marring and it has left black marks from too much pressure on the edges of the mitt. I think its a decent product, but I will look at others for my next purchase.
Read all customer reviews of Autofiber Paint Decontamination Clay Mitt
Customers Who Bought This Item Also Bought
Related Items
Related Categories
