CarPro HydrO2 Foam Reviews

Best car soap I have ever used, really good.

I could not believe the hazards listed on the SDS sheet of this product:

Causes Serious Eye Damage
May cause damage to organs through prolonged or repeated exposure
Very Toxic to Aquatic Life with Long Lasting Effects

These are warnings you'd typically see on a heavy solvent for crying out loud. This is a foaming car soap that people get all over their driveways and wash down

Good shampoo, I switch between this ang Gyeon Bathe. I can't decide which one I prefer more- both super slick and effective.

If you want a thick foaming soap this isn't for you. If you want a great shine after washing a vehicle this is the best I have used especially on black vehicles. It works great on our customers ceramic coated cars as a maintenance wash.

I absolutely love this product I don't use it to wash the car but I do use it to cut my drying time in half. I wash the vehicle normally then rinse and then I spray this on with the foam cannon I let it dwell for a few minutes rinse off and hook up my leaf blower. I use the torx 650cfm electric leaf blower takes 8 minutes to fully dry the vehicle off by the way you don't actually have to run it in to activate it it works fine on its own

Didn't foam as well as I was expecting in my foam cannon, (I had been using Meguires Hyperwash which foams a ton!) but its possible I didn't use enough. (used approx 1.5-2oz in cannon) It did leave a very nice shine after, and seems to work well as a booster for my ceramic coating. Water is beating well!

This was a reorder. Great product, easy to use and then step back to admire the results.

I use this product with a simple hose and foam gun for touchless washes on my ceramic coated vehicles and customers vehicles. It performs fantastic for lightly dirty cars and is a real time saver being able to clean and seal paint wheels and glass all at once. It dosent foam up as well as some other soaps and sometimes I have to go through with ECH20 to get some spot cleaning this missed or wasn't able to lift without agitating but all in all this is my new go to for quick washes!

I've been using Hydro2 Foam for a few months now and I'm very happy with the results. For me it's much easier to use than Hydro2 Lite. I sometimes overdo the amount of coating with Hydro2 Lite. I have also tried adding a coat of Reload. The result is lots of glossy shine and depth. Seems to last 2-3 months.

I love this product! The results are immediate. The vehicle feels very slick to the touch. I did find that it can streak some, but with a little waterless wash, it comes right out.

My customers and I absolutely LOVE this product! When applied in a foam cannon/pressure washer it enhances the paint's gloss and you can see the water start beading off immediately!

Here in Florida where the scattered showers are so random, this product gives peace of mind when washing your vehicle knowing your wash will last thru a few showers. I recently purchased a few 1000ml bottles but just found out they now come in gallons. I will be purchasing by the gallons next.

Cons: Suds are almost non-existent if using in a bucket, and doesn't foam as much as other soaps when using the foam cannons/pressure washers but I'm ok with it because the results are still the same. Awesome shine, great beading, and slick to the touch.

I really like this as i feel it helps "rejuvenate" the Cquartz on my personal car, which also makes drying super easy with some forced air. What i feel the downside is to this product is that it does not stay foamy in the bucket as many other soaps on the market but i can deal with that due to results i get.

Used with a pressurized bottle sprayer with the recommended ratio. Just as effective as using HyrdrO2, although I would have reservations about it's cleaning abilities when compared with other the average car wash soap or other Car Pro items such as Reset.

Using the pressurized sprayer or some other means does cut down on the number of buckets needed to do the wash.

ONE CAUTION: If you're also going to spray onto the wheels and they are attached to the vehicle, make sure to do a few short stops and test your brakes before driving at normal speed. They need to heat to melt away any residue from the solution as it tends to make a powerful grinding sound when the brakes are initially applied also effecting the performance of the brakes.

And remember to wear gloves and take the directions seriously when it says to rinse each panel immediately after application.

Bought a few 500ml bottles before I saw the 1000 available. No need in buying either anymore. Straight to the gallon. This product is amazing and the mitt glides across the car post foam unlike any other product I've used. Beading is amazing after.

Before trying out this soap. I actually washed the car 3 times with 3 different soaps, no beading or sheeting as expected. Then the last soap was this. I sprayed it on using a foam cannon/pressure washer. Used a mitt and wash the car. Sprayed the car down and it just beads and sheets like it was coated with cquartz. (of course cquartz beads more, but it is amazing how this product can make a car beads/sheets)

This product is absolutely amazing. I'll be ordering a few more bottles even it's getting cold over here in Chicago

I will be stocking up on this product for my customers as well as to use in my detailing shop! Used for the first time today and it worked amazingly!! Just sprayed onto clean wet panel out of a spray bottle that was properly diluted and followed by just rinsing off. Crazy water beading!! Highly recommend!