Griot's Garage THE BOSS Foam Cannon
$99.99
Use coupon DI499 for $4.99 Shipping on this item
Ships tomorrow when ordered in the next 20 hrs 7 mins
Buy now and pay over time with PayPal Credit. Learn more
Product Information
- Spray tons of suds all over your exterior quickly and easily
- Works with various electric and gas pressure washers
- Wash faster and more effectively
- Many upgrades over traditional foam cannons!
- Read full description
Product Description
The Griot's Garage THE BOSS Foam Cannon helps you produce a thick layer of washing foam when used in conjunction with a pressure washer! Simply pour in your favorite shampoo and get loads of suds on your vehicle! A foam cannon is great because When you touch your paint, even when washing, you are at risk of adding imperfections. You can however cut down this risk greatly by using high-quality products and detailing techniques. With the Griot's Garage THE BOSS Foam Cannon and your pressure washer, you can spray a thick layer of shampoo foam onto the surface, which breaks down contaminants and encapsulates them to make washing safer. If you have a gas or electric pressure washer, it will not matter, this Foam Cannon nozzle adjusts to produce a wide spray pattern of up to 40-degrees for efficient coverage or a narrow 0-degree stream for long-range dispensing on car roofs, trucks, and RVs. Another extremely cool feature is the Auto-Mix feature. This feature saves tons of time because you do not have to remove the reservoir and mix the product by hand. Just screw in the bottle of concentrate (i.e. Foaming Poly Gloss, Foaming Surface Prep, or Foaming Surface Wash.) and the changeable metering tip provides the proper ratio. This Foam Cannon is also built to last. It is made with stainless steel internal parts that resist chemical-induced corrosion. If you are looking for a high-quality Foam Cannon, the Griot's Garage THE BOSS Foam Cannon is an amazing choice!Features:
- Adjustable Fan Jet (0 degrees to 40 degrees)
- Micro Detergent Regulator
- Precision MAchined Stainless Steal Primary Manifold (Internal & External)
- EPDM Seals
- Patented Vented Cap
- Large Mouth Jar Opening
- Use included 33.8 oz reservior or attach directly to Griot's Garage 35 oz & 22 oz bottles
- Sure-Flow Metering Pick-Up Ball with Changeable Metering Tips
Videos
THE BOSSâ„¢ Foam Cannon Maintenance
Product Downloads
From The Label
Product Description
Shoot thick, rich foam that cleans as it clings!
- Take your car care to the next level
- Avoid wash-induced scratches
- Blanket the surface in seconds and let the foam do the work
- No measuring, no mixing, no mess to maximize your fun
- Precision machined stainless steel manifold will last a lifetime
Customer Reviews
Finally just pulled the trigger on the Griot's BOSS after trying a number of other high-end and value foam cannons. It definitely lives up to the billing! First, the construction is far superior to most competitors and it is apparent as soon as you put it in your hands. Built like a tank with stainless steel internals. It is great to not deal with the corrosion on brass and plated cannons, so I am sure that this will last a lifetime. The metering tips and direct bottle attachment are great features! I didn't think I would use this but now I am addicted to it. It will thread most standard bottle threads (I have used KCx and ADS bottles) and is much quicker than dealing with dilutions in the bottle. On a 1000 PSI and 2.5 GPM pressure washer with a 1.25 mm orifice, I measured about 1:75 dilution at the panel with one tip and 1:50 with the other, which probably equates to about 1:10 to 1:5 dilution ratio in the bottle.
A few notes: You can modify the size of the fan, but cannot change the angle from anything other than vertical, which I see as a positive because I never see the need to change this and just gives something else to get bumped and fiddled with constantly on other cannons. Performance of both foam production and metering tips is dependent on the pressure washer setup so you will need to be sure to compensate for this with choosing the right orifice size and also the correct metering tip. I plan to upside to 1.45 mm orifice to get a slightly more dilute output from the metering tip.
A few notes: You can modify the size of the fan, but cannot change the angle from anything other than vertical, which I see as a positive because I never see the need to change this and just gives something else to get bumped and fiddled with constantly on other cannons. Performance of both foam production and metering tips is dependent on the pressure washer setup so you will need to be sure to compensate for this with choosing the right orifice size and also the correct metering tip. I plan to upside to 1.45 mm orifice to get a slightly more dilute output from the metering tip.
A rock solid built cannon. Does everything correctly. I need to still evaluate the dosing tips. I'm pretty happy with it.
The build quality of this foam cannon is just what I was looking for. From the full stainless steel body to the sturdy bottle, it is a nice upgrade over the MTM PF 22.2 I was previously using. Currently using with an Active 2.0 and getting great foam as well.
I also enjoy the fact I don't need to dilute soap, and just use the provided metering tips to save time as I do use the Griots Surface Wash and Poly Gloss. My only small complaint would be the metering tips can be a pain to remove.
I also enjoy the fact I don't need to dilute soap, and just use the provided metering tips to save time as I do use the Griots Surface Wash and Poly Gloss. My only small complaint would be the metering tips can be a pain to remove.
Read all customer reviews of Griot's Garage THE BOSS Foam Cannon
Customers Who Bought This Item Also Bought
Related Items
Related Categories
