Griot's Garage Water Spot Remover
Please note: this product cannot be shipped through the air
- Remove ugly water spots safely and easily
- Works great on paint, chrome, plastic trim, and glass
- Simple spray on application
- Product Code: 10880
- Read full description
Product DescriptionThe Griot's Garage Water Spot Remover allows you to effectively remove unsightly water spots quickly and easily! Water spots come from the hard minerals that are left behind when water evaporates on the surface of your vehicle. Unfortunately these marks not only etch into the surface, but the longer they sit, the deeper they can etch and the harder they are to remove. This means they not only look bad but can etch into your paint requiring polishing to remove. Water Spot Remover features a simple spray-on, wipe-off application process. The convenient spray is exceptional for hard-to-reach areas like door jambs, grillwork, and more. After working it into the surface, rinse thoroughly and dry with your favorite drying towel. Water Spot Remover will help you remove these marks before they etch too deep and you will be left with a beautiful water spot free area. Easily address spots on paintwork, chrome, plastic trim, and glass. Stop looking at ugly water spots, remove them with the Griot's Garage Water Spot Remover!
From The Label
Griot's Garage Water Spot Remover effectively dissolves and removes minerals from exterior vehicle surfaces. Stubborn, above-surface water spots are dissolved in seconds with this simple spray-on, wipe-off formula. Easily address spots on paintwork, chrome, plastic trim and glass. The spray delivery is exceptional for hard-to-reach areas like door jams, grillwork, and more. May diminish waxes and sealants but will not affect chemical resistant ceramic coatings. WARNING: Follow Instructions. This product is highly effective and can cause negative results if used incorrectly. Not for use on polished aluminum, anodized surfaces or mirrors/polarized/coated glass. Test in an inconspicuous area before proceeding with treatment. Do not use in a windy environment and avoid overspray. Work on a cool, dry, and clean surface out of direct sunlight. Focus on a 1' x 1' area at a time.
Paint and Trim: Spray a liberal amount directly onto a painted surface, a microfiber towel, or an applicator and work into surface, not allowing to dwell for more than 60 seconds. Do not let dry. Wipe the surface, using a damp microfiber towel. Rinse and ring towel often. Glass: Spray a liberal amount directly onto a microfiber towel, or applicator. Focusing on a 1' x 1', agitate the glass surface in a cross hatch pattern for up to 60 seconds or permanent etching may occur. Do not let dry. Thoroughly wipe the surface, using a damp microfiber towel. Rinse and ring towel often. Re-apply as necessary. Once complete, neutralize the surface with a final car wash, Spray-On Car Wash, or rinseless wash. Note: Should water spots remain, surface may require paint correction or polishing to remove severe etching.
Sorry, there are no reviews yet. Be the first one to write a review!