Jescar All Purpose Cleaner
$11.99
Available Sizes
32 oz
$11.99
Product Information
- Strong, yet safe cleaner
- Can be diluted to various different ratios
- Safe on paint, glass, wheels, carpets, etc.
- Product Code: J-APCQ
- Read full description
Product Description
The Jescar All Purpose Cleaner is a highly concentrated cleaner designed for use on various surfaces to help you clean thoroughly and effectively! With all of the detailing supplies on the market, it can be tough to grab the right product to clean each and every surface around the vehicle. With the Jescar APC, you can dilute one formula down to different strengths for safe use on pre-cleaning the vehicle's exterior, engine degreasing, wheel cleaning and even interior fabric cleaning. The minimum dilution is 1:3 for heavy degreasing, 1:5-10 for exterior cleaning, 1:10-20 for interior fabrics/carpets. After testing an area, Jescar recommends spraying it directly onto the exterior surface and letting it dwell up to two minutes for stubborn stains as long as you avoid direct sun and it doesn't dry on the surface. Rinse off thoroughly once you are finished and you should have a remarkably clean surface. Use it on your paint, engine bay and so much more! If you need to remove heavy dirt and grime, look no further than the Jescar All Purpose Cleaner!From The Label
Product Description
- Alkaline based, solvent-free cleaner
- Removes surface contamination on paint
- Heavy grease-cutting ability for engine bays
Universal all-purpose cleaner is a concentrated solution for the removal of insects, grease, bird droppings, and other heavy contamination on automotive paint and other surfaces. Use in areas requiring heavy degreasing such as engine bays and workshop floors.
Directions
For cleaning automotive, RV, and truck exteriors, dilute with water 1:10.
Apply APC to the entire surface. Allow it to work for 1-2 minutes before thoroughly removing with a power washer. For heavy grease cleaning dilute 1:5, then remove after a few minutes with a power washer. For interiors such as carpet and fabric, dilute 1:10 to 1:20, then after cleaning remove with a damp sponge or wet vac.
Do not let dry on surface or work on hot surfaces.
Apply APC to the entire surface. Allow it to work for 1-2 minutes before thoroughly removing with a power washer. For heavy grease cleaning dilute 1:5, then remove after a few minutes with a power washer. For interiors such as carpet and fabric, dilute 1:10 to 1:20, then after cleaning remove with a damp sponge or wet vac.
Do not let dry on surface or work on hot surfaces.
Customer Reviews
Sorry, there are no reviews yet. Be the first one to write a review!
