Meguiar's Ultra Pro Speed Compound M110 - 32 oz
$42.99
Available Sizes
32 oz
$42.99
($1.34 / oz)
128 oz
$129.99
($1.02 / oz)
Product Information
- Eliminate heavy imperfections fast and easy
- Low dusting and long work cycle
- Designed for dual action polishers
- Pair this polish with a Meguiar's Pad for optimal results
- Product Codes: M11032, M11001
- Read full description
Product Description
The Meguiar's Ultra Pro Speed Compound M110 helps you safely and easily remove heavy imperfections from paintwork. The M110 was designed from the ground up with Dual Action (DA) polishers in mind. Meguiar's used what they call their SMAT Abrasive expertise. This polishing technology provides you with cutting power to remove RIDS, swirls, scratches and other ugly imperfections while producing minimal dust and a long working cycle. You can use this compound on soft, medium, or hard paint types. When polishing, apply 3 to 4 pea size drops to your pad and work on one panel at a time. You will be amazed at how fast you can remove severe defects and leave behind a more optically clear surface. Although this compound does finish down great, there is always a chance that some compounding haze will be visible, especially when working on darker colored paint. If you are looking for perfection, we recommend following up with the Ultra Pro Finishing Polish M210. Stop letting heavy imperfections take away from the look of your vehicle, use the Meguiar's Ultra Pro Speed Compound M110!Professional Detailer Reviews
At SEMA 2018, Meguiar's launched two new innovative polishing liquids, M110 & M210. These new DA specific advanced polishing liquids utilize SMAT (Super Micro Abrasive Technology) to delivery even and consistent cutting ability over the entire polishing cycle while also producing a low dusting effect. Basically, these abrasives don't breakdown like diminishing abrasives do. These SMAT abrasives stay consistent over a typical buffing cycle. This allows the user to have some control over the length of a polishing cycle without compromising finishing ability.
Videos
Meguiar’s M110 – Heavy Cut, High Gloss
From The Label
Product Description
- The next evolution of heavy-cutting high-gloss compounds
- Quickly removes 1,200 grit or finer sanding marks
- Easy wipe-off, virtually zero dust or sling with Rotary or DA
- Show Car Results When Paired with M210 Ultra Pro Finishing Polish
Engineered for body shop safe fast cutting with easy wipe-off and virtually no dusting.
Directions
SHAKE WEll. Always work on a cool, properly cured paint surface. Prime new or dry pads by misting on M34 Final Inspection.
TIPS: To achieve swirl free finish, clean pad frequently and apply moderate pressure on initial passes, reducing pressure gradually with final passes. Best when followed with M210 Ultra Pro Finishing Polish.
- Rotary: Set buffer to approximately 1200-1800 RPMS and apply product directly to the paint surface. Use with Meguiar's wool or Soft Buff pads and begin working in a 2' x 2' area with overlapping passes. Buff area using light to medium pressure. Reduce pressure when compound begins to dry.
- Wipe remaining residue with Meguiar's microfiber towel. Inspect finish with proper lighting. Continue working until defects or sanding marks are removed.
DA Polisher: Apply directly to appropriate Meguiar's Soft Buff DA Foam Disc. Set machine to 4-5 and begin working in a 2' x 2' area with overlapping passes. Apply moderate pressure on initial 2-3 passes followed with light pressure for following two passes.
TIPS: To achieve swirl free finish, clean pad frequently and apply moderate pressure on initial passes, reducing pressure gradually with final passes. Best when followed with M210 Ultra Pro Finishing Polish.
Customer Reviews
Take my review with a grain of salt as I actually helped develop this product (and the M210 that goes with it), but I can tell you that we did endless comparison testing before launching this and I still to this day (no longer with Meguiar's) use this as my #1 go-to compound 9 out of 10 times. What I went for when developing this was a product that was simply easy to use - less dust (less is more with this product, if you get dusting, use less product), easier wipe-off, and such an insane final finish that depending on the paint/job you sometimes do not even need to polish. Pair this with HDO foam pads for insane finishing.
I've been using Meguiar's products since 1996.
I always viewed them as the gold standard.
I've tried most of the top compounds currently on the market recently. So much that it took me a long time to try the new Megs twins.
Before I took possession of M110 I learned that it didn't require being "primed" like their past compounds, that it's a "less is more" type product.
The first vehicle I used it on was relatively trashed black Bentley. I used Buff and Shine Uro-Fiber on a Porter Cable 7424xp speed 4.5.
I was surprised at the work time of M110. It buffed forever, didn't dust, and cleared out everything but the deepest scratches in about four passes.
I started with four drops and reloaded with three. I was able to keep the fibers fluffed up easily with a brush. Clean out was really dusty, but I see this as a good thing, because it keeps the pad cleaner longer.
So, there time I'll start with another compound, and wonder why I just didn't start with this. I love the super easy wipe off, and smooth buffing feel. I love that it cuts a lot like M100, but without the dust. I love that it leaves an incredible finish.
I'd have to say Meguiar's really out did themselves again.
If feels good to be home again.
I always viewed them as the gold standard.
I've tried most of the top compounds currently on the market recently. So much that it took me a long time to try the new Megs twins.
Before I took possession of M110 I learned that it didn't require being "primed" like their past compounds, that it's a "less is more" type product.
The first vehicle I used it on was relatively trashed black Bentley. I used Buff and Shine Uro-Fiber on a Porter Cable 7424xp speed 4.5.
I was surprised at the work time of M110. It buffed forever, didn't dust, and cleared out everything but the deepest scratches in about four passes.
I started with four drops and reloaded with three. I was able to keep the fibers fluffed up easily with a brush. Clean out was really dusty, but I see this as a good thing, because it keeps the pad cleaner longer.
So, there time I'll start with another compound, and wonder why I just didn't start with this. I love the super easy wipe off, and smooth buffing feel. I love that it cuts a lot like M100, but without the dust. I love that it leaves an incredible finish.
I'd have to say Meguiar's really out did themselves again.
If feels good to be home again.
I am pressed with that years of working with this new product however, there was much said about no or minimal dust. I have found quite the contrary. I actually change out my pads Very frequently while working and therefore cannot contribute the dust factor to lack of clean pads. The dust is not a problem but there is quite a bit found on adjacent panels while working. Why hasn't anybody else mentioned this? I just don't know
LOVE THIS PRODUCT THOUGH and I will continue to use it!
LOVE THIS PRODUCT THOUGH and I will continue to use it!
Read all customer reviews of Meguiar's Ultra Pro Speed Compound M110
Customers Who Bought This Item Also Bought
Related Items
Related Categories
