The Last Detail The Final Polish - 16 oz

• Fine Finishing Polish - NO FILLERS
• Micro-marring/Surface Haze Removal
• Extended Product Work Time
• Pad Dependent Aggression
• Body Shop Safe - Silicone Free

The Final Polish (TFP) is a water-based finishing polish that was designed by a detailer for detailers. TFP is the finest abrasive formulation in the TLD Products line-up. It was developed as a finishing step in the paint polishing process. Its main purpose is to remove haze, holograms and micro-marring that may have been introduced during more aggressive polishing steps or poor clear coat maintenance. It can be used for paint enhancement to extract hidden gloss from the clear coat. This product will excel in situations where soft clear coats or delicate finishes are encountered.

The Final Polish was designed with a pure approach in mind. The goal was to keep the formula as light as possible which in turn provides a high resistance to rubber and plastic trim straining. This means the TFP is thin and light by design. Aggression can also be customized based on pad selection as it is compatible with all pad variations. It can also be used with dual action, forced rotation or rotary machines. TFP will be a great addition to your polishing arsenal if the best possible finish is what you seek. If The Last Cut or The Last Cut+ lacks the ability to finish due the formulation aggression, this is where The Final Polish is utilized. This SILICONE FREE formula contains NO FILLERS and is BODY SHOP SAFE.

Shake well before use. Ensure surface is clean, dry, and free of contaminants. Bonded contaminants should be removed using a clay bar or preferred method. Do not use on surfaces that are excessively hot to the touch.

When working with a dual action or forced rotation polisher, prime pad by applying 5-6 dots of product on your chosen pad. After the pad is primed 3-4 dots of product can be used. For added aggression, a more aggressive pad or 1-2 additional dots can be added to the pad.

Work product into a 24" x 24" section or an area based on your polishing experience. Machine speed will vary based on the task at hand, however speed 4-5, medium pressure with slow arm speed can be utilized to work through the polishing phase. When using a high-speed rotary polisher use speed 1200-1600 RPM.

The light formulation of TFP will turn clear but it will still have defect removal and finishing ability. Working under a light is recommended. Remove polish residue with a folded plush microfiber towel. If residue remains, flip towel and wipe again to remove the remaining polish. The Final Polish does not provide protection so a separate product will be needed to protect the recently polished surface.