3D ACA 500 X-tra Cut Compound
This product qualifies for $4.99 Shipping with coupon DI499
- Remove heavy swirls, scratches, oxidation, etc.
- Alpha Ceramic Alumina provides quick polishing results
- Low dusting formula makes for easy cleanup
- Product Code: 500OZ32
- Read full description
Customer Reviews100% of customers said that they would buy this item again
Based upon 1 ratings
Customers Who Bought This Item Also Bought
Product DescriptionThe 3D ACA 500 X-tra Cut Compound helps you remove medium to heavy imperfections faster than before! The secret to the corrective power in this compound is the Alpha Ceramic Alumina. This water-based abrasive helps provide low heat output and high-speed leveling that will correct even the most challenging clearcoats. ACA 500 is easy to use, easy to clean-up (low dusting), is sun friendly and contains no harmful solvents, kerosene or OSHA regulated crystalline silica. If you have lighter imperfections or need to perform a second polishing step, the 3D ACA 520 Finishing Polish paired with a light corrective pad is a fantastic choice. Working by hand or with a polisher, reach for the 3D ACA 500 X-tra Cut Compound to remove heavy imperfections with ease!
From The Label
- Cuts P1000 or finer
- Foam or wool pad
- Long working time
- Easy clean-up
- True paint correction
3D ACA 500 X-tra CUT COMPOUND is infused with innovative ALPHA CERAMIC ALUMINA. This revolutionary new compound is a low heat, high speed leveling abrasive that will correct the most challenging applications. This precisely engineered compound provides truest paint correction in the shortest time. 3D ACA 500 X-TRA CUT COMPOUND can be matched perfectly with eiter a WOOL or FOAM pad, rotary or dual action polisher.
Sand to desired level of grit. Set buffer speed (3D preferred speed 800-1800 RPMs). Apply enough 3D ACA X-TRA CUT COMPOUND 500 to work a 2' x 2' area using either 3D wool pad or 3D spider-cut foam pad. Buff with slow back and forth overlapping motions until correction is complete. After sanding scratches are eliminated, remove any residue with a clean microfiber cloth.
Reviewed by Michael G. on 10/23/2019
Would they buy this item again? Yes
This is a great compound. It cuts well and it finishes out well. Nice working time and no dusting. It pairs nicely with 3D One.