CarPro HydrO2 Foam
$34.99
Please note: this product cannot be shipped through the air
Available Sizes
500 ml
$21.99
($0.04 / ml)
1000 ml
$34.99
($0.03 / ml)
Product Information
- Wash and protect your paint in one easy to use product
- Removes contamination and leaves behind strong protection
- pH Neutral and no cure time needed
- Gloss and Hydrophobic durability of 3 months or more
- Product Codes: CP-35HF5, CP-35HF1
- Read full description
Customers Who Bought This Item Also Bought
Product Description
The CarPro HydrO2 Foam, also known as HydroFoam, will allow you to wash and coat your car with protection in one easy step! HydrO2 Foam is a pH Neutral shampoo designed to gently lift and remove dirt and other contamination from your paint safely and easily. A special lifting lubricant was added to the formula, which not only allows dirt and grime to be lifted from the surface, but also provide a lubricant that allows your wash mitt to glide across the surface. This greatly reduces the risk of implementing new imperfections in the paint during the wash process! The rich foam cleans the surface with ease, but the other great feature of this wash is that it leaves behind a durable silica shell that produces a brilliant shine and protects your car from harmful uv rays, dirt, grime, brake dust, bug splatter, etc. Use HydrO2 Foam on your paint, glass, plastic, wheels, calipers, and wheel wells. If you are looking to clean and protect your car from harmful environmental contamination, the CarPro HydrO2 Foam is a great choice!Features:
- pH Neutral
- Instant Vehicle Release: No cure time needed
- Resistant to nearly all acids, alkaline solutions, and solvents
- Gloss and Hydrophobic durability of 3 months or more
Precautions:
- Do not apply HydrO2 Foam in the sun or to a hot surface
- In shaded location rinse the vehicle of all grit
Application Instructions (By Hand):
- Rinse vehicle
- Spray HydrO2 Foam (diluted 1:9) from a spray bottle onto panel(s) OR apply small amount directly to wet mitt and spread
- Wash with mitt (as usual)
- Rinse mitt and panel(s)
- Move to next panel(s) and repeat steps 2-4
- Rinse the entire vehicle well
- Dry any remaining water by blowing off and or with a drying towel
Application Instructions (Foam Cannon):
- Dilute 1:9 in Foam Cannon
- Foam surface (Do NOT allow to dry on surface)
- Wash with mitt (as usual) rinsing after each panel
- When vehicle is finished rinse entire vehicle very well
- Remove any remaining water with drying towel
Professional Detailer Reviews
If you're looking for a true one-step process for washing and sealing your vehicle, HydrO2 Foam may be a real time saver!
Videos
HydroFoam - Wash&coat
From The Label
Product Description
- Wash & Coat in 1 step.
- Enhance glass & smoothness.
- Dirt & water repellent.
- Durable up to 3 months.
Directions
2 Modes:
Foam Lancer:
Hand Wash:
Foam Lancer:
- Work under shade, rinse the vehicle well.
- Dilute 1:9, close foam gun valve completely.
- Apply HydroFoam all over your car.
- Immediately wash with mitt and rinse very well.
Hand Wash:
- WOrk under shade, rinse the vehicle well.
- Dilute 1:9 in a bucket.
- Wash the car section by the section with wash mitt. Rinse immediately very well after each section.
- Dry any remaining water by blowing or drying towel.
Customer Reviews
This was a reorder. Great product, easy to use and then step back to admire the results.
I use this product with a simple hose and foam gun for touchless washes on my ceramic coated vehicles and customers vehicles. It performs fantastic for lightly dirty cars and is a real time saver being able to clean and seal paint wheels and glass all at once. It dosent foam up as well as some other soaps and sometimes I have to go through with ECH20 to get some spot cleaning this missed or wasn't able to lift without agitating but all in all this is my new go to for quick washes!
I've been using Hydro2 Foam for a few months now and I'm very happy with the results. For me it's much easier to use than Hydro2 Lite. I sometimes overdo the amount of coating with Hydro2 Lite. I have also tried adding a coat of Reload. The result is lots of glossy shine and depth. Seems to last 2-3 months.
