Gtechniq Marine Ceramic Base
$119.99
This product qualifies for $4.99 Shipping with coupon DI499

Please note: this product cannot be shipped through the air
Available Sizes

50 ml
$119.99
Product Information
- A super durable coating layer
- The glossy finish lasts for a long time
- Easy application
- Product Code: MCB 0.05 x6
- Read full description
Product Description
The Gtechniq Ceramic Base is a coating product designed to protect your marine surface with ease! This special nanotechnology doesn't create a temporary barrier, it is a permanent coating that will allow you to protect your gel coat. This protective barrier is extremely hard and exceptionally durable against swirls, scratches, watermarks, dirt and grime buildup, and more. Don't forget about the shine as well, the gloss level is incredible! You will enjoy looking at the fresh and glossy finish for years to come. It helps protect from UV rays and it can not be removed by strong shampoos, pressure washers, etc. Over a couple of years, the coating will eventually fade or you can remove it by polishing but otherwise, it is there to stay. Before applying it you should thoroughly wash and decontaminate the surface as the coating does need a clean and bare Gelcoat surface to adhere to.Application Instructions:
- Please allow at least 12 hours after application for the Ceramic Top to fully cure.
- If applying directly to gelcoat or topcoat, polish the surface to remove any imperfections.
- Soak the application pad with product. Spread onto an area measuring no more than 2' by 2' (60 x 60cm) and remove residue with a clean microfiber towel.
Gtechniq Marine Ceramic Products
Videos
Gtechniq Marine - How to Protect Your Boat Gtechniq Marine Ceramic Base
Marine How To: Applying Base Coat
From The Label
Product Description
Ceramic Base forms a protective barrier which is extremely hard and exceptionally durable. This makes it very effective at preventing swirling and minor scratching from poor washing techniques. With great gloss retention, Ceramic Base becomes the functional surface of the gelcoat.
Ceramic Base can be applied as a stand-alone product. For best results and maximum hydrophobic performance, we recommend overcoating with Ceramic Top.
Ceramic Base can be applied as a stand-alone product. For best results and maximum hydrophobic performance, we recommend overcoating with Ceramic Top.
Directions
1. PERFECT
If required, polish the gelcoat to remove any imperfections.
1. DEGREASE
Ceramic Base bonds best to surgically clean surfaces. Use Gtechniq Panel Wipe and a Gtechniq MF1 Microfibre to remove all polish residue.
1. APPLY
Soak the application pad with product. Spread on to an area measuring no more than 2' x 2' (60 x 60cm) and remove residue with a Gtechniq MF1 Microfibre
If required, polish the gelcoat to remove any imperfections.
1. DEGREASE
Ceramic Base bonds best to surgically clean surfaces. Use Gtechniq Panel Wipe and a Gtechniq MF1 Microfibre to remove all polish residue.
1. APPLY
Soak the application pad with product. Spread on to an area measuring no more than 2' x 2' (60 x 60cm) and remove residue with a Gtechniq MF1 Microfibre
Customer Reviews
I made a little experiment with this product by using it on my ‘08 Mini and even my mountain bike after a one-step correction on each. My thought process is that if this coating holds up against the ocean, it will work strongly on a car. I am very impressed. The beading isn't quite as strong as CSL, but the depth is amazing. The most interesting quality of this marine coating is the amount of time it can sit before flashing. Something came up where the bike had the coating sit for about 45 minutes and it still came off with a little elbow grease and no polishing. Time will tell but as far as I can tell this is a great alternative to a traditional paint coating if the conditions to apply aren't ideal/flash time is an important factor. Would buy again.