Gtechniq Marine Multi-Stage Polish - 500 ml
$37.99
Available Sizes
500 ml
$37.99
Product Information
- Compound and polish with one easy to use polish!
- Remove ugly imperfections, while providing a glossy finish
- Can be applied by hand or via buffer
- Eco-friendly formula
- Product Code: MMP 0.5 x6
- Read full description
Product Description
The Gtechniq Marine Multi-Stage Polish combines the compounding and polishing stages, saving you time and energy! Unlike traditional polishes that cut the surface, this polish contains nanoscale alpha alumina particles that reflow the surface. This simply means that it is less aggressive and helps remove surface defects without the need for an abundance of compounding or polishing steps. For best results, we recommend applying this polish with a foam pad on your favorite polisher. A heavy cutting foam pad will make quick work of ugly swirl marks and a hazy finish. If you only have light imperfections, you can apply using a less aggressive pad, or by hand. After application, say goodbye to oxidation, staining, scratches, swirl marks, etc. The swirl-free, glossy finish will turn your head and have you questioning why you were using two polishing steps in the past! Best yet, this product is eco-friendly and safe for the environment. So what are you waiting for, save time and energy by combining polishing steps with the Gtechniq Marine Multi-Stage Polish.From The Label
Product Description
Multi-Stage Polish is a low dusting, non-sling, VOC free, composite polish specifically designed for marine applications. It contains diminishing abrasive technology that quickly and effectively restores the glossy finish to any gelcoat or topcoat surface without the use of aggressive solvents.
Directions
How To Use:
Step 1.
If the surface is heavily oxidised polish first using a Gtechniq Hotswap Cutting Pad with a rotary polisher.
Step 2.
For less oxidised surfaces use a Gtechniq Hotswap Medium pad. Then finish with a Hotswap Finishing Pad on a rotary polisher.
Step 3.
Buff with a Gtechniq Marine Microfibre Buff Cloth until you have a streak-free finish. If you find it hard to remove product, wipe with a wet Marine Microfibre Buff Cloth and then buff with a dry one.
Step 1.
If the surface is heavily oxidised polish first using a Gtechniq Hotswap Cutting Pad with a rotary polisher.
Step 2.
For less oxidised surfaces use a Gtechniq Hotswap Medium pad. Then finish with a Hotswap Finishing Pad on a rotary polisher.
Step 3.
Buff with a Gtechniq Marine Microfibre Buff Cloth until you have a streak-free finish. If you find it hard to remove product, wipe with a wet Marine Microfibre Buff Cloth and then buff with a dry one.
Customer Reviews
Sorry, there are no reviews yet. Be the first one to write a review!
