I started off using Power Lock Plus which is a great, easy to apply product and lasts about six months. When Jescar introduced their SiO2 Spray Wax, I began topping the PLP with that and saw a significant increase in durability. Now I get the same protection and durability with Ultra Lock Plus in a single step. I have seen good protection and continued beading for upwards of one year even in the rainy Pacific Northwest. I apply with a DA polisher and a black pad to get thorough coverage, wipe residue with a heavy count microfiber, and then do a final buff with a another of the same. This produces a flawless finish, great shine and excellent durability. On my 40ft RV with full body paint in dark colors, when it came time to reseal, all I needed to do on the sides and back was wash, clay mitt and reseal. The front, which takes a beating, still needed a pre-seal fine polish. I wash only when needed and using only straight downward motions with Blackfire Rinseless wash and heavy microfibers. The Jescar finish plus this wash technique keeps swirls and light scratches to a minimum.

This is an awesome sealant. Goes on super easy and comes off just as easy leaving a shine very close to that a coating. I can't say for sure how long it lasts but it's a lot tougher to clean out of my pads than the other sealants I have used. It is now my go to for all the cars I detail wanting the exterior done unless of course they want a ceramic coating. Isn't fussy to remove even with high humidity as other sealants I have used are.

Jescar UltraLock + is just as easy to use as Power Lock +. Whether you apply it with a dual action polisher on a soft finishing pad or by hand, once it sets up, wiping down any residue is a breeze.