Koch Chemie Micro Cut & Finish P3.01 - 250 ml
$24.99
Please note: discount codes do not apply to this item
Quantity
Discounts
Quantity | Price | Savings | |
2 - 3 | $23.49 | 6% | Add 2 to Cart |
4 + | $22.49 | 10% | Add 4 to Cart |
Available Sizes
250 ml
$24.99
($0.10 / ml)
1000 ml
$71.99
($0.07 / ml)
Product Information
- It provides light correction and produces great clarity!
- Safely removes very light swirls, holograms, and oxidation
- Long work time and easy wipe off
- Product Codes: 404250US, 404001US
- Read full description
Product Description
Looking for a light correction with the ability to leave behind a crazy amount of clarity? If so, the Koch Chemie Micro Cut & Finish P3.01 is the polish for you! Koch Chemie formulated the P3 with highly specialized, extremely homogeneous abrasive bodies. These particles allow you to target and remove very light swirls, holograms, and oxidation, all while finishing down to an optically clear, glossy surface ready for a protective layer application. If you are working on soft or sensitive paint surfaces, the P3 is powerful, yet gentle enough for your situation. It also stays "wet" longer, providing you with long work time and easy wipe off. If you have any heavier imperfections in the paint, you may need to reach for the Koch Chemie M3, F6, or H9 first. Add the Koch Chemie Micro Cut & Finish P3.01 to your detailing collection today! It contains carnauba wax and non-fugitive silicons.Cut: 3.2 Gloss: 9.5
From The Label
Product Description
Micro polishing compound with carnauba wax
Micro polishing compound for the permanent removal of holograms, fine scratches and sanding marks of P3000 grain size with simultaneous long-term sealing with high degree of gloss and smoothness. Contains carnauba wax and non-fugitive silicones.
Micro polishing compound for the permanent removal of holograms, fine scratches and sanding marks of P3000 grain size with simultaneous long-term sealing with high degree of gloss and smoothness. Contains carnauba wax and non-fugitive silicones.
Directions
Areas of use: Paintwork of cars, commercial vehicles, motorcycles, etc.
Recommendations of use: Wet new or dry Micro Cut Pads completely with polish. Spread the polish evenly with the machine switched off. Switch the machine on (ideally an orbital polisher with forced rotation) and apply the polish crosswise with medium pressure thoroughly. Afterwards polish with low pressure. Remove polish residue with a microfiber cloth.
Shake before using. Before using, check suitability and compatibility. Do not use on hot surfaces. Protect against frost and excessive heat.
Recommendations of use: Wet new or dry Micro Cut Pads completely with polish. Spread the polish evenly with the machine switched off. Switch the machine on (ideally an orbital polisher with forced rotation) and apply the polish crosswise with medium pressure thoroughly. Afterwards polish with low pressure. Remove polish residue with a microfiber cloth.
Shake before using. Before using, check suitability and compatibility. Do not use on hot surfaces. Protect against frost and excessive heat.
Customer Reviews
Sorry, there are no reviews yet. Be the first one to write a review!
Customers Who Bought This Item Also Bought
Related Categories